X96 is a full-featured PID controller designed for use in hazardous environments. It is housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating - completely dust proof and a good level of protection against water. It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100, Cu53 as well as other 3-wire RTD sensors, 0 - 50 mV and 4-20 mA or 0 - 20 mA linear inputs. A large LED dual-display on the front of the process controller shows the difference in values of the setpoint and process value while 11 additional LEDs indicate the state of each of the 4 relays, 4 setpoints, Auto/Manual and communication status. Buttons on the front of X96, accessible through the flameproof enclosure, allow operators to easily set up to 5 setpoints - 4 for the relays as well as one for a 4 - 20 mA signal should they choose to use the linear output for control. With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy. X96's electromagnetic relays trigger heating, cooling or any of 6 types of alarms - full-scale high/low, deviation high/low, inband and outband. It also retransmits an isolated output signal to other devices such as a Programmable Logic Controller (PLC). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. X96 is an auto-tuning controller; from cold start or at setpoint. Typical applications are temperature control, RH control, thyristorised heating applications, AHU control in HVAC and BMS applications.
Please choose from our customization options and enter under comments while inquiring about this product`