Low Differential Pressure Switch for General Industrial Service View Gallery
Add to inquiry cart Add to compare Email product

Download detailed specifications for this product

Download PDF

Low Differential Pressure Switch for General Industrial Service

Series 1800

Essential for industrial environments, the Series 1800 combines small size and low price with 2% repeatability for enough accuracy for all but the most demanding applications. Set point adjustment inside the mounting stud permits mounting switch on one side of a wall or panel with adjustment easily accessible on the opposite side. UL and CSA listed, and FM approved.

  • Service: Air and non-combustible, compatible gases
  • Wetted Materials: Consult Factory
  • Temperature Limits: -30 to 180°F (-34 to 82.2°C). 1823-00, -20 to 180°F (-28.9 to 82.2°C)
  • Pressure Limits: 10 psig (68.95 kPa) continuous, 25 psig (172.4 kPa) surge
  • Switch Type: Single-pole double-throw (SPDT)
  • Repeatability: ±2%. Electrical Rating: 15 A @ 120-480 VAC, 60 Hz. Resistive 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz. De-rate to 10 A for operation at high cycle rates
  • Electrical Connections: 3 screw type, common, normally open and normally closed
  • Process Connections: 1/8" female NPT
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
  • Set Point Adjustment: Screw type inside mounting spud
  • Weight: 1 lb, 5 oz (595 g)
  • Agency Approvals: CE, CSA, FM, UL. NOTE: Optional (-EXPL) Explosion-proof Enclosure does not possess any agency approvals.

Applications

Industries

Customization

    Not Available

    Please choose from our customization options and enter under comments while inquiring about this product`

Inquiry for

required after months
×

Email Details Of Low Differential Pressure Switch for General Industrial Service - Series 1800



×