Download detailed specifications for this product

Download PDF

Photohelic® Pressure Switch/Gage

Series A3000

Photohelic® Switch/Gages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic® gage design. The Photohelic® switch/gage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for low/high limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar).

  • GAGE SPECIFICATIONS
  • Service: Air and non-combustible, compatible gases
  • Wetted Materials: Consult Factory
  • Accuracy: ±2% of FS at 70°F (21.1°C). ±3% on -0 and ±4% on -00 models
  • Pressure Limits: -20" Hg. to 25 psig (-0.677 to 1.72 bar). MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar). 36003S – 36010S; 150 psig (10.34 bar). 36020S and higher; 1.2 x full scale pressure
  • Temperature Limits: 20 to 120°F. (-6.67 to 48.9°C) Low temperature option available
  • Process Connections: 1/8" female NPT
  • Size: 4" (101.6 mm) dial face, 5" (127 mm) O.D. x 8-1/4" (209.55 mm)
  • Weight: 4 lb (1.81 kg)
  • SWITCH SPECIFICATIONS
  • Switch Type: Each setpoint has 2 Form C relays (DPDT)
  • Repeatability: ±1% of FS
  • Electrical Rating: 10A @ 28 VDC, 10A @ 120, 240 VAC
  • Electrical Connections: Screw terminals. Use 167°F (75°C) copper conductors only
  • Power Requirements: 120 VAC, 50/60 Hz; 240 VAC & 24 VAC power optional
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations
  • Set Point Adjustment: Adjustable knobs on face
  • Agency Approvals: CE, CSA, UL. NOTE: Optional (-EXPL) Explosion-proof Enclosure does not possess any agency approvals.

Applications

Industries

Customization

    Not Available

    Please choose from our customization options and enter under comments while inquiring about this product`

Inquiry for

required after months
×

Email Details Of Photohelic® Pressure Switch/Gage - Series A3000



×