Share this product with friends
Telegram
Messanger
2-4 Door Interlock Systems - 4 Door Controller
Model : DXC241
- Power supply: External Voltage: 90-264 VAC, Internal Voltage: 12V/5.42 A
- 4 No touch switch/touch keypad per door
- 4 General purpose inputs
- 4 Relay outputs for magnetic locks
- 2 General purpose relay outputs
- Communication: USB/RS485
- 2 to 4 door Configuration using utility
Similar Products
Pass Box Controllers 2-Door, 3-Door |DXC421
- Advanced 32-bit microcontroller
- Status of all doors are shown in the LCD Display Panel
- Door interlock logic/control with audio-visual annunciation
- Auto/Manual mode for outputs
- CF LAMP ON when any door is open
- UV Lamp logic/control with lamp life monitoring function
- LED indication for CFL, UV & FAN on LCD display panel
- Provision of FAN trip with LED indication
- Buzzer alarm for High DP & Low DP
Door Interlock Systems - Upto 4 Nos - 4 Door Controller Economy |DXC341
- Power supply: External Voltage: 90-264 V AC, Internal Voltage: 12V/2.1A
- 2-4 General purpose inputs
- 2 General purpose relay outputs ,4 Relay outputs for magnetic locks
- LED indications per door
- Parameters configure by dip switch
2-8 Door Interlock System - 8 Door Controller |DXC281
- 1) External voltage: 100-240 V AC/1.8A (60Hz)
- Internal voltage : 12V/6.25A
- 4 General purpose inputs
- 2 General purpose relay outputs and 8 Relay outputs for magnetic locks.
- Dimensions (in mm): 360(L) x 325(W) x 80(H)
- Material: MS, Powder coated
- Mounting: Wall
- Relative humidity:5-95% RH, non-condensing
No Touch Switch With LED & Buzzer Control |NTS201
- Power supply : 12 - 24 VDC
- Sensing range : 4 to 26 cm (±20%)
- Inputs : Red LED control, Green LED control, Buzzer control
- Output : Potential free relay contact
- Distance and time adjustment (optional)
- Ingress protection : IP65 (≈NEMA 3SX)
- Isolation between coil and contact : 500 VAC / 1min
- Brush or mirror finish plates
- Various SS plate sizes
- Dimensions : 52x55.5x115 mm (rectangular), 86x55.5x92 mm (square)
Customers Also Viewed
8-Channel Scanner, 96x96x109 |UMX201
- 8 universal analog inputs
- Isolated RS485/MODBUS RTU Upto 57600 Baud rate
- 18-35 VDC supply
- Maximum 4 or 8 relays
- Comprehensive alarm/trip logic programming Multiple levels of configuration and password protection
Multicolour Clean Room Monitor |Hawkeye NLD501
- Relative Humidity, Temperature & Differential Pressure measurement
- Software programmable channel ranges, units & input types
- 3 programmable alarms with buzzer and output to operate external relays
- Real Time Clock with battery back-up
- Real Time Clock synchronized with server clock via Ethernet
- Software calibration for all 3 channels
- 20-30 VDC supply
- Advanced digital Relative Humidity & Temperature sensor technology
- Guaranteed back-up against communication/SCADA/computer failures
- Different 4 communication options are available RS485 Modbus® RTU, BACnet MS/TP, Ethernet Modbus® TCP, BACnet IP
- Datalogging option available
- Full datalogging control through utility
- Supports Modbus ® TCP Protocol to get data using Modbus ® TCP client on SCADA/PLC/HMI
- 4 x Modbus® TCP clients supported at a given time (multi-master/multi-host)
- FTP as an open standard protocol - instrument can be used by a third party system integrator with any SCADA or PLC or HMI
- 3 x FTP clients supported at a given time with 180 seconds internal FTP connection timeout
Wireless Transmitters & IoT Edge Gateways With Datalogging |RFS201
- Supports up to 105 or 180 transmitters based on selected bandwidth
- Each IoT Edge Gateways (Receivers) supports 15 transmitters; system expandable with additional IoT Edge Gateways (Receivers)
- Battery-powered transmitters (factory settable)
- Ethernet IoT Edge Gateways (Receivers) with Modbus TCP & FTP OR MQTT protocol communication
- Automatic CSV data logging with storage up to 16 days
- Data buffering in both transmitters and IoT Edge Gateways (Receivers) to prevent data loss during communication failure
- Optional RF repeater for extended range and obstacle mitigation
No Touch Switch With LED & Without Buzzer Control |NTS203
- Power supply : 12 - 24 VDC
- Sensing range : 7 to 14 cm (±20%)
- Output : Potential free relay contact
- Inputs : Red LED control, Green LED control
- Ingress protection : IP65 (≈NEMA 3SX)
- Isolation between coil and contact: 500 VAC / 1min
- Brush or mirror finish plates
- Various SS plate sizes
- Dimensions : 52x46x115 mm (rectangular), 86x46x92 mm (square), 41x46x115 mm (rectangular)
