Share this product with friends
Telegram
Messanger
Sanitary RTD with SMS Connection
Model : RHS701
- Offered with sanitary SMS connection with or without male part and gasket
- Pressure range up to 40 bar
- SS316L material as standard for wetted parts
- Reduced tip design for quick response & to minimize flow restrictions
- Surface finishing Ra ≤ 0.6 μm as standard
- Degree of protection : IP68
Similar Products
RTD Temperature Transmitter |RTT201
- Dual 2-wire, 4-20 mA or dual 3-wire 0-10 VDC outputs
- Temperature range selection, parameter configuration and calibration with
- USB to serial converter (DCC501)
- Handheld configurator (HHC202) · Inbuilt LCD and 3 keys
- Health / status (Heartbeat) LED
- Isolated RS485 / MODBUS RTU or BACnet MS/TP
- High degree of protection against condensation & pollution
- Wall mount, duct mount & remote sensor option available
- 1/2" BSP adjustable compression fitting or triclover process connection option available
- Convenient installation with 2-part housing with fixed back and removable electronics
- Integral sensor (default) or remote sensor
RTD For Autoclave Validation |RAC243
- 0 to 150°C (32 to 302°F)
- Class A (1/2 DIN) accuracy
- Pt100, 3-wire/4-wire, Simplex/Duplex
- Cable length 3/5/10 m
- Sheath material SS316L (1.4404)
- Leakproof assembly
Signal Isolator, HART Compatible |SCC302
- HART compatible
- Accuracy : ±0.1% of span (±20 mA)
- 1500 VAC RMS galvanic isolation between supply, input & output
- 750 ohms load resistance
- Excitation supply for 2-wire transmitter
- Din rail mount
- 20-35 VDC supply
RTD Probe for Acid and Alkalies |RAA200
- Upto 200°C range
- Teflon Sleeve or Coating
- Available in Hastelloy and Titanium Sheath
- Terminal Head or PTFE Insulated Cable Termination
- Sheath OD 6.5 mm, 7 mm, 8 mm
Customers Also Viewed
Magnetic Level Gauge With Transmitter & Alarm |MLG201
- Continuous level monitoring with 4-20 mA transmitter output
- Direct visible level indication
- No process fluid in contact with the flapper indicating system
- Safe for corrosive, toxic & flammable liquids
- Economical level measurement
Float & Board Type Level Indicator |FBG201
- Assured level indication without power supply
- Simple and reliable operation
- High visibility display
- Low maintenance & cost-effective
- Weatherproof & corrosion resistant
Relative Temperature Transmitter for HVAC |TTA201
- Input : Pt100, Pt1000
- Accuracy : ±0.3°C
- Output : 4-20 mA, 0-10VDC, 0-5VDC, 0-1VDC
- Unit : °C or °F
- Enclosures : Space, Wall, Duct, Outside Air
Carbon Dioxide Transmitter, Wall Mount |CDE201
- NDIR CO2 sensor with dual channel detection technology for superior stability in occupied and non-occupied buildings
- Health/status (Heartbeat) LED
- Measurement range upto 10,000 PPM
- Accuracy ±50 PPM ±3% of reading
- Ambient pressure and altitude compensation to achieve high level of CO2 accuracy
- Automatic Self Calibration (ASC) algorithm
- Configurable for CO2 range
- Analog output voltage or current
- Active or passive 4-20 mA output
- Isolated RS485 Modbus® RTU output
- Resistance temperature output
- Optional temperature measurement for band gap sensor
- Parameter configuration and calibration with PC & USB to Serial Converter (DCC501)
- Handheld configurator (HHC202)
- LCD and 3 keys
- Convenient installation with 2-part housing with fixed back and removable electronics
- Stylish housing with vents for air flow across sensor for better accuracy
