Share this product with friends
Telegram
Messanger
Dual Relative Humidity / Temperature 2-Wire Output Transmitter, Wall & Duct
Model : RHT861
- 4 analog isolated outputs with true 2-wire operation, 2 RH, 2 T, 4 RH, 4 T
- Isolation : 1500 VAC RMS, 50 Hz/1 minute
- Precision Class A Pt100, Pt500, Pt1000 or band gap temperature sensor options
- Accuracy ±2% RH, ±0.5 deg C for band gap & ±0.2 deg C for RTD Class A sensor
- Any number of outputs (1-4) can be assigned to any parameter : RH, T or dew point
- Dual row 7 segment LCD option to display Relative Humidity, Temperature or Dew point (programmable)
- Parameter configuration via LCD & keys or remote display module or PC configurator using USB to Serial Converter DCC501
Similar Products
Humidity / Dewpoint / Temperature Transmitter, Wall & Duct |HTW201
- 2 x 2-wire, 4-20 mA or 0-10 VDC outputs
- Any output can be assigned to any parameter
- Configuration and calibration using PC with Radix converter DCC501
- Health/status LED
- Calculated parameters : Dewpoint, Absolute humidity, Heat index, Enthalpy
- Wall, Duct, Outside & Remote sensor versions
- Convenient installation with 2-part housing with fixed back and removable electronics
Particulate Matter & Air Quality Transmitter |PVE201
- Laser scatter method sensor for Particulate Matter measurement
- MEMS metal oxide semiconductor sensor to detect poor Air Quality
- Measurement : Particulate Matter, VOC, CO2 equivalent (CO2e), Air Quality Index
- Particulate Matter measurement for particles PM1, PM2.5, PM4, PM10
- Analog output voltage or current
- Handheld configurator or PC utility for parameter settings e.g. PM range, filter, bias
- Isolated RS485 Modbus® RTU output
- SPST, 30 VDC-3A relay output
Air Quality Monitor, PM1/PM2.5/PM4.0/PM10/CO2/CO/ TVOC/RH-T/AQI, 3 Relays, RS485 Modbus |AQM201
- Laser scatter method sensor for Particulate Matter measurement
- MEMS metal oxide semiconductor sensor to detect poor Air Quality
- NDIR CO2 sensor technology for superior stability in occupied and non-occupied buildings
- Measurement : Particulate Matter, TVOC, RH/T, CO2, CO, Air Quality Index
- Isolated RS485 Modbus® RTU output
- Dual relay output, 250 VAC-5A
- Field Replaceable PM, CO2, CO, TVOC, RH/T sensor
- RH/T sensor also provides the parameters like : Dewpoint, Absolute humidity, Heat index, Enthalpy, Air density
Relative Humidity / Temperature Indicator, Battery Operated |RHT803
- Battery operated
- 1 year+ battery life (Duracell 9V, Alkaline)
- Accuracy : ±2% RH, ±0.5°C
- Software calibration - no trimpots
- IP65, rugged construction
- Dual 7-segment LCD display to show Relative Humidity & Temperature
- Programmable sampling interval, unit, bias, etc
- RTC display
- Remote sensor option with maximum cable length upto 25 meters
Customers Also Viewed
HART, 2-wire Temperature Transmitter, Isolated, Universal Input, LCD Display, Flameproof |SCC631
- Universal Input settings with HART protocol for various input signals
- 4-20 mA input (optional)
- 2-wire technology, 4-20 mA analog output
- High accuracy over total ambient temperature range
- Optical isolation
- An internal temperature sensor for active temperature compensation
- Wide supply voltage range
- User programmable measurement range settings
- Configuration with HART/USB interface
- Simple and user friendly utility software
2-wire Temperature Transmitter |TX1HM
- RTD Pt100, 3-wire input
- 2-wire, 4~20mA analog output
- 8 SPAN ranges, 25 to 600 C° / 45 to 1080 F°
- 4 ZERO ranges, -100 to +70 °C / -148 to +158 °F
- Accurate : 0.1% temperature linear
Three Phase SCR Power Controller For Resistive Load, 35 - 200 A |TPR-3P-48xxx-H
- Phase angle control technology
- 4-20 mA / 0-10V / 2-10V / 0-5V / 1-10V control input
- Suitable for three phase resistive load
- Configuration : Three phase star without neutral / closed delta
- Adjustable soft-start & soft control for smooth output voltage control
Capacitance Level Transmitter |CPT201
- Highly reliable with low maintenance
- There are no moving parts, measuring range 10-5000 pf
- Two point calibration for more accurate control
- For repeat installations the capacitance value can be directly programmed into the instrument reducing calibration time
- Customisable 4 to 20 mA and Switch outputs.
