Share this product with friends
Telegram
Messanger
Parking Ventilation Controller
Model : VLC201
- In-built 24 VDC supply for CO transmitters
- 24 General Purpose Relay outputs available for Exhaust fans, Fresh Air fans, JetVent fans
- Power supply : 85-265 VAC
- 9 potential free digital inputs
- One fire alarm input for emergency purpose and One alarm ack input
- Cascade Controller - Accessory for VLC201
Similar Products
Particulate Matter & Air Quality Transmitter |PVE201
- Laser scatter method sensor for Particulate Matter measurement
- MEMS metal oxide semiconductor sensor to detect poor Air Quality
- Measurement : Particulate Matter, VOC, CO2 equivalent (CO2e), Air Quality Index
- Particulate Matter measurement for particles PM1, PM2.5, PM4, PM10
- Analog output voltage or current
- Handheld configurator or PC utility for parameter settings e.g. PM range, filter, bias
- Isolated RS485 Modbus® RTU output
- SPST, 30 VDC-3A relay output
Carbon Monoxide Transmitter, Wall Mount |CMW201
- User configurable CO ranges upto 1000 ppm
- Optional 4-digit dual row LCD display to display carbon monoxide value in ppm
- Heartbeat LED for device health status
- DIP selectable Loop powered current output or voltage output
- Optional dual 4-20 mA output
- IP65 (≈NEMA 3SX) protection for enclosure
- Wall mount arrangement
- Internal switch provided to adjust zero ppm
- DIP for range selection
Air Quality Monitor, PM1/PM2.5/PM4.0/PM10/CO2/CO/ TVOC/RH-T/AQI, 3 Relays, RS485 Modbus |AQM201
- Laser scatter method sensor for Particulate Matter measurement
- MEMS metal oxide semiconductor sensor to detect poor Air Quality
- NDIR CO2 sensor technology for superior stability in occupied and non-occupied buildings
- Measurement : Particulate Matter, TVOC, RH/T, CO2, CO, Air Quality Index
- Isolated RS485 Modbus® RTU output
- Dual relay output, 250 VAC-5A
- Field Replaceable PM, CO2, CO, TVOC, RH/T sensor
- RH/T sensor also provides the parameters like : Dewpoint, Absolute humidity, Heat index, Enthalpy, Air density
Carbon Dioxide Transmitter, Wall Mount |CRE201
- NDIR CO2 sensor for superior stability in occupied and non-occupied buildings
- MEMS metal oxide semiconductor sensor to detect VOC
- Health / status (Heartbeat) LED
- CO2 measurement range upto 10,000 PPM
- Accuracy ±50 PPM ±3% of reading
- Ambient pressure and altitude compensation to achieve high level of CO2 accuracy
- Automatic Self Calibration (ASC) algorithm
- Configurable for CO2 range
- Analog output voltage or current
- Active or passive 4-20 mA output
- Isolated RS485/MODBUS RTU output
- Resistance temperature output
- Optional temperature measurement using band gap sensor
- Parameter configuration and calibration with PC & USB to Serial Converter (DCC501)
- Handheld configurator (HHC202)
- LCD and 3 keys
- 4-in-1 wall mounted transmitter with CO , relative humidity (%RH), temperature (T) & TVOC measurement
- Convenient installation with 2-part housing with fixed back and removable electronics
- Stylish housing with vents for air flow across sensor for better accuracy
Customers Also Viewed
Three Phase Three Leg Zero Cross SCR Power Regulator, 50-200 A |TPR-3P-48xxx-3z
- Zero Crossover control technology
- 4-20 mA / 0-10 V / 2-10 V / 0-5 V / 1-10 V control input
- Suitable for 3-phase resistive load
- Configuration : 3-phase star without neutral / closed delta
- Adjustable power control
Wet To Wet Differential Pressure Transmitter |DLP201
- Dual remote pressure sensor design
- Isolated RS485/BACnet
- Field selectable ranges
- Dual analog output voltage or current
- Field accessible push button
- Digital remote zero input
- Programmable port swapping
- SPDT relay output
- IP65 rated enclosure to provides protection against dust and moisture for electronic and remote pressure sensor
- Parameter configuration and calibration
- Using PC & USB to serial converter DCC501
- In-bulit display and keys
Low Cost Paddle Flow Switch - Economy Model |PFS202
- Field changeable paddles
- Compact design (Economy model)
- Low weight
- Easy installation
- Fixed set flow
Multifunction Meter With LED Display, 96Wx96Hx62D |MLD605
- Power, Energy, Import/Export Energy, Dual Source
- Accuracy Class 1.0 as per IEC62052-11
- Modbus® RTU communication via RS-485 port
- Customized display with bar graph for load current
- Touch safe barrier terminals with terminal cover & sealing provisions
- Energy Reset option
- Dual Source input - Separate address for storing DG parameters
- RPM measurement, Load Hrs, ON Hrs measurement
- Field Programmable Star, Delta or Single Phase configuration
- Updating time of 1 second
- User settable display scroll time
- Password protected setup mode
- Wide-range AC/DC auxiliary power supply
