Loop Powered Isolator

LPI61

• Loop Drop 5V
• Load 0 - 600 Ohms without load trimming

USB TO SERIAL CONVERTER - ISOLATED

DCC501

• Compatible with USB 2.0
• 12Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission
• LEDs for indicating USB and TxD/RxD activity
• 2 kV isolation between PC and the instrument being programmed
• Din rail and surface mount

SERIAL TO ETHERNET CONVERTER WITH DUAL MASTERS

DCC211

RS232 TO RS485/RS422 CONVERTER

DCC301

• Transmission rate : 300 - 115200bps
• Transmission distance : RS485 1200m, RS232 5m
• Working mode : asynchronous, half duplex, differential transmission
• Supports 32 nodes on RS485 bus
• 3-port isolation between Power Supply, RS232, RS485 & RS422

USB TO HART CONVERTER - ISOLATED

DCC503

• Complete HART device interface
• Complies with HART physical layer
• Provide 2 KV isolation between PC and HART instrument that eliminate grounding effect

RS485 ISOLATED REPEATER

DCC302

• 1800V optically isolated data lines
• -40 to 80°C operating temperature
• Modbus ASCII/RTU

SIGNAL ISOLATOR, DUAL OUTPUT

SI4P

• 0/4~20 mA input
• Line fault detection

USB TO RS485 CONVERTER - ISOLATED

DCC505

• Compatible with USB 1.0/2.0
• LEDs for indicating USB and TxD/RxD activity
• 2 kV isolation between PC and devices on the RS485 bus

MULTI HOST ETHERNET TO SERIAL CONVERTER

DCC603

• 10/100 Mbps Ethernet port
• Browser based configuration utility
• TCP MODBUS protocols
• Serial Interface : RS232, RS485, RS422

SERIAL TO ETHERNET CONVERTER WITH PoE

DCC202

• 10/100 Mbps Ethernet port
• Browser based configuration utility
• Telnet, TCP Modbus protocols
• Serial interface : RS232, RS485, RS422

Analog Input Modules with Channel-to-channel Isolation

SCM211

• 4 channels, each with isolated universal input
• Isolated RS485/ MODBUS RTU, upto 57600 BAUD RATE
• Channel-to-channel isolation of 300 V AC
• Cost-effective Remote I/O For PLCs
• Powerful, flexible SCADA software
• Tmax version with 4~20 mA

Serial to Ethernet Converter

DCC201

Signal Isolator

SCC401

• Voltage, Current, TC/RTD, Ohms, etc

Signal Isolator

SCC311

• Universal input
• Dual ouput
• LED display

Signal Isolator

SCC402

• AC/DC Voltage
• AC/DC Current

Signal Isolator

MSI4P

• AC current/voltage input
• Dual output

Signal Isolator

MSI7P

• Universal input
• 5 outputs
• Integral LCD

Signal Isolator

MSI7PC

• Oxygen lambda sensor

Analog Input Module

SCM201

• 8 channels, each with universal input
• Isolated RS485/MODBUS RTU, up to 19200 Baud rate
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

HART® Communication Protocol Software

Model DevCom2000

Ethernet I/O Module

DCC621

• 5 Digital Inputs: Digital, Frequency, Counter
• 5 Digital Outputs: Digital, PWM
• 10/100 Mbps Ethernet port
• Automatic MDI/MDI-X detection for plug-and-play