Displacer level switch

DLS201

• Suitable for narrow and wide level ranges
• Range : Upto 15 mtrs
• Adjustable setpoints
• Suitable for viscous and slurry type liquids

Ultrasonic Level Transmitters

ULT202 / ULT211 / ULT212

• ULT202, ULT212 : 0.4m ~ 10m for liquids
• ULT212 : 4~20mA or 4~20mA/HART
• Process connection : M66×2 or flange

Hawkeye - RH+T+DP Indicator

HAWKEYE

• Micro-controller based
• RH+T+DP Indicator
• 3 User programmable channels measurement
• Slave display unit - RH+T+DP remote

Stick On Surface Temperature Thermocouple

TST500 & RST500

• Self Adhesive Tape
• Quick Response
• (-50) °C to +180 °C

Surface Temperature Thermocouple - Washer

TST300

• J/K/T
• Up to 300 °C

Analog Input Modules with Channel-to-channel Isolation

SCM211

• 4 channels, each with isolated universal input
• Isolated RS485/ MODBUS RTU, upto 57600 BAUD RATE
• Channel-to-channel isolation of 300 V AC
• Cost-effective Remote I/O For PLCs
• Powerful, flexible SCADA software
• Tmax version with 4~20 mA

3-Port Signal Isolator

SI3P

• Input: Voltage, Current, TC/RTD

Laser Welded Flush Flanged Chemical Seal Unit

CSU900

• For High Pressure Applications
• SS316L / Hastalloy / Tantallum Diaphragm
• Up to 6000 psi / 420 kg/cm²

Flushed Flange Chemical Seal Unit

CSU500

• High Pressure Applications
• All stainless steel design
• Up to 1000 psi / 70 kg/cm²

Welded Chemical Seal Unit

CSU400

• For High Pressure Applications
• All-SS Welded Construction
• Up to 6000 psi / 420 kg/cm²

Radar Level Transmitters - Contact Type

RLT201

• Contact type measurement
• Measuring range up to 30 meter
• Exproof

Submersible Level Transmitters

SLT201

• 2 wire, 4 to 20 mA output
• Fully sealed IP68 sensor for permanent submersion
• Special polyurethane cable ensures more flexibility and durability.
• SS316 Construction

Float Guided Level Switches

FGS201 / FGS202 / FGS203 / FGS204 / FGS205 / FGS206 / FGS207

• Rugged construction
• Easy mounting with flanged or threaded connection
• Multilevel monitoring upto 4 levels

FLOAT & BOARD LEVEL GAUGE

FBG201

• Simple
• Easy mounting
• Low maintenance
• Economical measurement solution

Tubular level gauge

TBG201

• Rugged construction
• Easy mounting
• Low maintenance
• Direct visible level indication
• Economical measurement solution

Surface Temperature RTD Sensors- Washer Type

RST202 / RST203

• Easy to install & replace
• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• -50 to 250°C range
• SS304 washer

Transition Joint RTD Sensors - Reduced Tip

RTJ220

• Platinum RTD in 2/3/4-wire configuration with single/dual elements in Class B/Class A
• -50 to 250°C range
• Integral cable makes the assembly lighter and easy to install
• Reduced tip design for faster response

Flameproof RTD - with Sanitary fittings

RHF607

• Flameproof die cast aluminum head (SS304, SS316 and cast iron heads optional)
• -50 to 250 °C range
• SS316L Sheath

Magnetic Level Gauge

MLG201

• Rugged construction
• Easy mounting with flanged connection
• Low maintenance
• Continuous level monitoring (with use of transmitter 4-20mA output)

Reflex Level Gauge

RLG201

• For Visual Indication
• Flanged, Threaded Unions, Butt Weld Ends Connection
• Process connection orientation : Side/side, top/bottom with back/back

Cable Float Switches (Tilt Level Switches)

CFS201

• Low cost polypropylene level switch
• Hermetically sealed/moulded
• Microswitch operated

SS304 Tension Flange Chemical Seal Units

CSU300

• For High Pressure Applications
• Bolted Construction
• Up to 3000 psi / 210 kg/cm²

Cup Tension Flange Chemical Seal Unit

CSU200

• For low pressure applications
• Bolted construction
• Up to 150 psi / 10 kg/cm²

Thermocouple for Air and Gas

TG000

• Flowing non-corrosive air
• Up to 400°C
• Perforated tip for fast response

Pipe Line RTD-Tri Clover Connection with Weld-In TEE

RPL602

• SS316L Weld-in TEE joint
• -50 to 250°C
• For pharmaceutical industries

Pipe Line RTD - Tri Clover Connection With Clamp-In TEE

RPL601

• 0.5”/1”/1.5 /2” Tri clover connections
• -50 to 250°C
• For pharmaceutical industries

RTD sensor For Dry Heat Sterilizer (DHS)

RDH245

• For high pressures and temperatures
• -50 to 250°C
• 3-wire Pt100 element in simplex or duplex assembly

Quick Disconnect RTD - Tri-Clamp M12 Connector

RCM607 / RCM617

• 1” / 1.5”/ 2” Triclover connection
• -50 to 250°C range
• 3-wire Pt100 element in simplex or duplex assembly

Sanitary RTD with Tri Clover Connection - Head Type

RH6*7

• 0.5” / 1” / 1.5” / 2 “ Triclover connections
• 2, 3 or 4-wire platinum element in simplex or duplex assembly
• -50 to 250°C

Low Cost Thermocouple

TL200

• Low cost varieties
• Class 2 (IEC) grade thermocouple wires
• Up to 300°C

Quick Disconnect Thermocouples

TQ

• Mineral Insulated
• Lightweight
• Quick response time

Stick On Thermocouple

TS

• Self Adhesive Tape
• Less than 0.2 sec response
• -30 °C to +180 °C

Dial Thermometer - Gas Filled (Temperature Gauge)

TGN200

SIDE MOUNTING LEVEL SWITCH PIVOTED TYPE

SPS201

• Process Connection: threaded BSP, NPT / flanged / triclover
• Switch rating :0.1 - 5 amps@250V AC

Schaffer Diaphragm Pressure Gauge

PGD800

• High resistance to over pressure
• Highly suitable for extremely viscous or crystallizing media.

HART® Communication Protocol Software

Model DevCom2000

Electrical contact Temperature Gauge

G Series

• Max. 250 V, 1 Amp rated power
• Magnetic snap action contact
• 100 and 150 mm dial sizes

Bimetallic Dial Thermometer (Temperature Gauge)

TGB200

• Bimetallic sensing element
• 2.5” / 4” / 6” dial sizes
• -50 °C to 400 °C

Sanitary RTD with Female Nut

RHW601

• Female process connections
• -50 to 250°C
• 2, 3 or 4-wire platinum element in simplex or duplex assembly

ANALOG INPUT MODULE WITH ETHERNET PORT

SCM203

• 8 universal analog inputs
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

HOMOGENIZER SEAL GAUGES

HMG201

• Process connection with flush, all welded
• Diaphragm, with or without retainer flange
• For highest dynamic pressures 160 bar up to 700 bar
• Robust, all welded design

Diaphragm Seal With Thread Connection

CSA03 Series

• High pressure bolted construction, standard model
• Threaded process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Diaphragm Seal With Threaded Connection

CSA02

• Low pressure bolted construction, economy model
• Threaded process connection for direct mounting

Low Pressure Diaphragm

LPA01

• Low pressure economy version
• Element made of SS316 diaphragm

Diaphragm Seal With Welded Flange

CSF16

• Flush type welded construction, standard model
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Vaccum Type Pressure Gauge

VBE200

• Bourdon tube type vacuum gauge
• All internal and external SS construction
• Excellent load cycle stability and shock resistance

Electrical Contact Gauge

EOC200

• Adjustable, snap action contact
• Standard 1NC+1NO switching function

Electrical Contact Gauge

EOC500

• Adjustable, snap action contact
• Standard 1NC+1NO switching function

Diaphragm Seal, Flange Mounted Pressure Gauge

CSF06

• Flush type bolted construction, standard model
• Flanged process connection for direct mounting
• Weatherproof to IP68 per IS/IEC 60529:2001

Diaphragm Seal with I Section

CSE08

• I-section type bolted construction
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Pressure Transmitter

PTD251

• Termination : Aluminum head with threaded cap and chain with single compression cable gland
• Excellent load cycle stability and shock resistance
• 4-20mA, 2-wire output signal

Diaphragm Seal With Flush Flange

CSF10 Series

• Flush type welded construction, standard model
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

SANITARY GAUGE - INDUSTRIAL AND PROCESS APPLICATIONS

SDT01

• All Stainless steel construction
• 1.5” or 2” Tri-clover connection
• Whether proof to IP68 per IS/IEC 60529:2001
• Diaphragm material, SS316L
• Scale ranges upto 0...42 2 kg/cm
• Available with liquid filled case for application with high dynamics pressure pulsations or vibrations

Clean Room monitor

Hawkeye XL

• RH, Temperature and DP measurement
• 3-rows, 3 digit, 1" (25.4 mm), RED colour LED display for PV, 4th row, 4 digit, 0.8" (20.3 mm), RED colour LED display for Real Time Clock
• Real Time Clock with battery backup
• Advanced digital RH+T and differential pressure sensor technology available
• SCADA to program parameters through PC

Pressure Transmitter

PTX201

• All stainless steel construction
• Excellent load cycle stability and shock resistance
• 4~20 mA, 2-wire output
• Ranges upto 400 barg

SANITARY RTDS

RHS802

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Sheath length : 25mm & above. 6mm / 6R above 25mm and upto 200mm. 8mm / 8R for longer sheaths.
• Wetted parts made of SS316L (1.4404)
• SS304 terminal head with IP68

RTD SENSORS FOR FERMENTERS

RCF202

• Pt100 3-wire single / dual circuit
• Class A or higher accuracy
• Wetted parts made of SS316L

RTD SENSORS FOR FERMENTERS

RHF300

• Pt100 3 wire Single / Dual circuit
• Temperature range - ambient -50... +85°C
• Temperature range - sensors tip -50...+150°C

Differential Pressure Gauge

DPG

• Monitoring of filter contamination
• Level measurement in closed vessels

Gas Filled Dial Thermometer

G (Rigid Stem) G-AC(Extension Capillary)

• Fast response
• Suitable for sanitary application
• All SS construction
• Rigid stem or Capillary type

DIAPHRAGM SEAL, CAPSULE TYPE WITH THREADED CONNECTION

CSA05

• High pressure welded construction, economic model
• Threaded process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Liquid Filled Dial Thermometer

Liquid Filled

• Fast Response
• Suitable for sanitary application
• All SS construction
• Rigid stem or Capillary type

Bimetal Dial Thermometers

BEA Bimetal

• Coiled bi-metal sensing element
• All stainless steel construction
• -40 to 400 °C

Welded Low Pressure Diaphragm Gauge

LPA12 Series

• Low pressure economy version
• Element made of SS316 diaphragm

Head Mount Temperature Transmitter

SCC643

• RTD Input
• Non-Isolated
• Programmable

Float Guided Level Transmitters

FGT201

Float Guided Level Switches

FG202

SIGNAL ISOLATOR, DUAL OUTPUT

SI4P

• 0/4~20 mA input
• Line fault detection

USB TO HART CONVERTER - ISOLATED

DCC503

• Complete HART device interface
• Complies with HART physical layer
• Provide 2 KV isolation between PC and HART instrument that eliminate grounding effect

RS232 TO RS485/RS422 CONVERTER

DCC301

• Transmission rate : 300 - 115200bps
• Transmission distance : RS485 1200m, RS232 5m
• Working mode : asynchronous, half duplex, differential transmission
• Supports 32 nodes on RS485 bus
• 3-port isolation between Power Supply, RS232, RS485 & RS422

SERIAL TO ETHERNET CONVERTER WITH DUAL MASTERS

DCC211

USB TO SERIAL CONVERTER - ISOLATED

DCC501

• Compatible with USB 2.0
• 12Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission
• LEDs for indicating USB and TxD/RxD activity
• 2 kV isolation between PC and the instrument being programmed
• Din rail and surface mount

SANITARY RTD WITHOUT PROTECTION SHEATH

RHS70 Series

• Offered with Sanitary SMS Connection with / without male part and gasket
• -50 to 250°C & -50 to 400°C
• Customized sheath lengths

RTD SENSORS FOR FERMENTERS

RHF400

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient -50... +85°C
• Temperature range - sensors tip -50...+150°C

Multi-Channel Scanner

ISOSCAN-V

• 16 Channel Temperature Scanner
• Non-volatile memory for parameters - no batteries
• 3 key, 5 level programming
• Setpoint and level locks

Multi-Channel Scanner

ISOSCAN-H

• 16 Channel Temperature Scanner
• RS485 with MODBUS RTU
• Powerful, flexible SCADA software available

8 Channel Scanner

UMX201

• 8 universal analog inputs
• Maximum 4 or 8 relay outputs
• 85~265 VAC or 18~35 V DC supply

RTD SENSORS FOR FERMENTERS

RHF410

• Pt100 3 wire Single / Dual Circuit, Class A accuracy
• Wetted parts made of SS316L
• Surface finish Ra <=0.8 micro m (Standard)
• SS304 terminal head and Coupling nut

SANITARY RTD WITH TRI CLOVER CONNECTION - HEAD TYPE

RHS602

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Wetted parts made of SS316L (1.4404)
• Die cast aluminum terminal head (IP68)

HYGIENIC SENSOR FOR PIPE LINE

RTP502

• Maximum temperature : Probe : 200°C, Cable : 200°C
• Accuracy : Pt-100 element, IEC 60751 Class A
• Process connection : G 1/8” for mounting to weld-in boss or thermowell

RTD Sensors for Fermenters

RXF300

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient -50... +85°C
• Temperature range - sensors tip -50...+150°C

SANITARY RTD

RHS610

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• Head mounted transmitter with 4-20mA output
• Temperature range - ambient, -50... +85°C
• Temperature range - sensors tip, -50...+250°C
• Ra value <=0.51 micro m for wetted parts and <= 0.8 micro m for non wetted parts

SANITARY RTD

RHS600

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient, -50... +85°C
• Temperature range - sensors tip, -50...+250°C
• Roughness value (Ra) <= 0.8 micro m and <= 0.51 micro m for non wetted and wetted parts respectively

SERIAL TO ETHERNET CONVERTER WITH PoE

DCC202

• 10/100 Mbps Ethernet port
• Browser based configuration utility
• Telnet, TCP Modbus protocols
• Serial interface : RS232, RS485, RS422

General Purpose Bourdon Pressure Gauge (Liquid filled)

Series 110.000

• 0 to 1000 Kg/cm²
• Non-corrosive Gases and Liquid Media
• Copper alloy wetted parts
• 50,63 100 and 150mm dial size

Head Mount Temperature Transmitter

TX1HM

• Pt100

Blind Temperature Controller

ELEKTRA II

• J, K, Pt100
• 1 Setpoint
• 72x72

Digital Temperature Indicator

EK490

• J, K, Pt100
• 48x96

Digital Temperature Indicator

PRIMA 0SP

• J, K Pt100
• 96x96

Digital Temperature Controller

PRIMA 480

• J, K, Pt100
• 48x48

Digital Temperature Controller

EK1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK4SP

• J, K, Pt100, mA, mV
• 4 Setpoints
• 96x96

Blind Temperature Controller

C961

• J, K, Pt100
• 1 Setpoint
• 96x96

RH+T Transmitter

SC805

• Surface / Wall / Duct Mount
• LCD Display

RH+T Transmitter

SC807

• Surface / Wall / Duct Mount

Loop Powered Isolator

LPI61

• Loop Drop 5V
• Load 0 - 600 Ohms without load trimming

Multi-Channel Scanner

ISOSCAN

• 16 Channel Temperature Scanner
• Front panel user calibration
• Input burn protection

RH+T Wet and Dry Bulb Controller

RHC301

• Wet and Dry Bulb %RH Controller
• RS485

RH+T Transmitter

SC806 (Flameproof - Wall Mount)

• Wall Mount
• FLP

RH+T Transmitter

SC804

• Surface Mount
• FLP
• Dual Display

Digital Temperature Controller

EK2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK491

• J, K, Pt100 mA, mV
• 1 Setpoint
• 48x96

Head Mount Temperature Transmitter

SCC641

• User programmable with PC based utility software and USB configurator
• 2-wire technology, 4~20 mA analog output
• 2000V AC RMS galvanic isolation

Sanitary Gauges - Sterile Connection

PGF400 / PGF401

• All Stainless steel construction
• 0…42 Kg/cm²
• IP 68 per IS/IEC 60529:2001

Pt100 Handheld Thermometer

Accurad71

• Pt100 Input

Flameproof RH + T ON-OFF Controller

HX96A (Flameproof)

• RH+T ON-OFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Counter

RCT301 (Flameproof)

• Preset Counter with Rate Indicator
• IP65
• Gas Groups I, IIA and IIB

Flameproof Rate Indicator

RCT206 (Flameproof)

• RPM/RATE Indicator with Alarms
• IP65
• Gas Groups I, IIA and IIB

Flameproof Controller

TEC302 (Flameproof)

• Programmable Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Programmable Indicator

TEC301 (Flameproof)

• Programmable Temperature Indicator
• IP65
• Gas Groups I, IIA and IIB

Universal Input Handheld Thermometer

Unirad

• Universal Input

Tri-Clover Mounted Sanitary Pressure Gauge

PGF300 / PGF301

• 0 to 42 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• Diaphragm material: SS316L

Low Pressure Diaphragm Gauge

PGD500 / PGD506

• Low pressure upto 1000mbar
• SS 316L diaphragm
• Economy version

Economy Sealed Gauge - With Cup Type Tension flange

400.000 (Old model no - PGS200 / PGS201 / PGS210 / PGS211)

• 0 to 16 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For non corrosive gases and liquids
• Diaphragm: SS316L with Teflon protection

Flanged Sealed Gauge with I-Section Sealed Unit

PGS600 / PGS601 / PGS610 / PGS611

• 0-210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316L Teflon protected
• I section type bolted construction

Flanged Sealed Gauge with Bolted Sealed Unit

PGS500 / PGS501 / PGS510 / PGS511

• 0-70 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• Diaphragm material, SS316L Teflon protected
• Flush type bolted construction
• For corrosive gases, liquid, viscous media

Economy Pressure Gauge with Welded Sealed Unit

PGS400 / PGS401 / PGS410 / PGS411

• 0-400 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316 Diaphragm
• For non corrosive gases and Liquids
• Economic model

High Pressure Sealed gauge

PGS300 / PGS301 / PGS310 / PGS311

• 0…210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For corrosive gases, liquids and viscous media

Industrial Bourdon Type Pressure Gauge

PBE200

• Suitable for corrosive environments and gaseous or liquid media
• Excellent load cycle stability and shock resistance
• Utility, pipe line, air & water application

Pipe Line RTD Sensor - Threaded Connection

RPL201

• For Pharmaceutical / Biopharmaceutical industries
• -50 to 250 °C
• Reduced sheath assembly for fast response

Timers

RCT606

• Memory Timer
• 72x72
• 1 setpoints

Counter

RCT403

• Preset Counter
• 72x72
• 6-digit pushwheel switch

Signal Isolator

SCC311

• Universal input
• Dual ouput
• LED display

Signal Isolator

SCC401

• Voltage, Current, TC/RTD, Ohms, etc

Flameproof Pipe Mount Temperature Transmitter

TX3DRB

• 14~32 V DC loop supply
• Isolation : 1000 V AC RMS, 50 hz/1 minute
• 4~20 mA or 20~4 mA selection for output
• Linear mode & Square root mode option for linear input

DIN Rail Temperature Transmitter

TX2DR (TC/mV)

• Isolated
• TC/mV

DIN Rail Temperature Transmitter

TX2DR (Pt100)

• Isolated
• Pt100

DIN Rail Temperature Transmitter

TX1DR

• Pt100 or TC/mV

Head Mount Temperature Transmitter with HART Communication

SCC631

• Universal settings with HART protocol for various input signals
• 2-wire technology, 4~20 mA analog output
• High accuracy over total ambient temperature range
• Optical isolation

Signal Isolator

SCC402

• AC/DC Voltage
• AC/DC Current

Signal Isolator

MSI4P

• AC current/voltage input
• Dual output

Counter

RCT301

• Preset Counter with RPM/RATE Indicator
• 72x72

Rate Indicator

RCT203

• RPM/RATE Indicator with Totaliser
• 48x96

Rate Indicator

RCT206

• RPM/RATE Indicator with Alarms
• 48x96

Analog Input Module

SCM201

• 8 channels, each with universal input
• Isolated RS485/MODBUS RTU, up to 19200 Baud rate
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

Loop Powered Indicator

PLD40B

• Field mount
• Programmable

Loop Powered Indicator

PLD40A

• Panel mount
• Programmable

Signal Isolator

MSI7PC

• Oxygen lambda sensor

Signal Isolator

MSI7PB

• Carbon potential transmitter

Signal Isolator

MSI7P

• Universal input
• 5 outputs
• Integral LCD

Head Mount Temperature Transmitter-

SCC642

• RTD Input
• Non-Isolated
• Programmable