RH+T TRANSDUCER

RHT811 - Without Display

• 2 x Analog outputs
• Accuracy : ± 2% RH, ± 0.5 °C
• Software calibration - no trimpots
• 18~30 V AC/DC supply
• PC programmable
• RS485 communication with MODBUS PROTOCOL

Acid and Alkali RTD - With Protection Tube

RAA200

• For low-concentration acids and alkalis
• Up to 250°C

Electrical contact Temperature Gauge

G Series

• Max. 250 V, 1 Amp rated power
• Magnetic snap action contact
• 100 and 150 mm dial sizes

Acid and Alkali Thermocouple - Teflon Protective Sleeve

TAA530

• For Corrosive Environments
• Up to 200°C

Autoclave Validation Thermocouples

TAC243

• For Autoclave Validation, not continuous use
• 0 to 150°C range

Bimetallic Dial Thermometer (Temperature Gauge)

TGB200

• Bimetallic sensing element
• 2.5” / 4” / 6” dial sizes
• -50 °C to 400 °C

Mineral Insulated Thermocouple

TCMI

• Compact inorganic insulation (MgO)
• Range of dia
• Fast response

Stick On Thermocouple

TS

• Self Adhesive Tape
• Less than 0.2 sec response
• -30 °C to +180 °C

Quick Disconnect Thermocouples

TQ

• Mineral Insulated
• Lightweight
• Quick response time

Multisheathed Thermocouples with Metallic Outer Sheath & Ceramic Inner Sheath

TM501

• Used in toxic gases at high temperatures
• High quality ceramic inner sheath
• Resistant to thermal shocks

Bearing Temperature RTD - Single Circuit / Dual Circuit

RBT200 / RBT201

• Sensitive, quick response tip
• -50 to 260 °C

Plastic Bayonet RTD Sensors

RPB202 / RPB206 / RPB212 / RPB 306

• For Plastic Process Machinery and Quick Connecting Applications

RTD with Lemo Connector

RCL607 / RCL617

• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• Other calibrations & higher accuracies on request
• -50 to 250°C range
• 0.5” / 1” / 1.5” / 2 “ Triclover connections

4 ½ DIGIT PROCESS INDICATOR WITH ALARMS

TEC401

Surface Temperature RTD Sensors- Washer Type

RST202 / RST203

• Easy to install & replace
• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• -50 to 250°C range
• SS304 washer

Transition Joint RTD Sensors - Reduced Tip

RTJ220

• Platinum RTD in 2/3/4-wire configuration with single/dual elements in Class B/Class A
• -50 to 250°C range
• Integral cable makes the assembly lighter and easy to install
• Reduced tip design for faster response

Flameproof RTD - with Sanitary fittings

RHF607

• Flameproof die cast aluminum head (SS304, SS316 and cast iron heads optional)
• -50 to 250 °C range
• SS316L Sheath

Hawkeye - RH+T+DP Indicator

HAWKEYE

• Micro-controller based
• RH+T+DP Indicator
• 3 User programmable channels measurement
• Slave display unit - RH+T+DP remote

Surface Temperature Thermocouple - Washer

TST300

• J/K/T
• Up to 300 °C

Analog Input Modules with Channel-to-channel Isolation

SCM211

• 4 channels, each with isolated universal input
• Channel-to-channel isolation of 300 V AC
• Isolated RS485/MODBUS RTU
• Cost-effective Remote I/O For PLCs

Flameproof RTD sensors - Angular Assembly

RHF210 / RHF216 / RHF219

• Temperature measurement in hazardous environments
• Angular assemblies for complex installation
• 0 - 250 °C

Low Cost Thermocouple

TL200

• Low cost varieties
• Class 2 (IEC) grade thermocouple wires
• Up to 300°C

Banbury Thermocouple

TR009

• Used in Banbury mixers
• J type
• Manufactured as per customer specifications

Indoor Air Temperature RTD

RHV201 / RHV202

• ABS thermoplastic housing
• -20 to 65 °C
• 3-wire Pt100 element in simplex assembly

Quick Disconnect RTD - Tri-Clamp M12 Connector

RCM607 / RCM617

• 1” / 1.5”/ 2” Triclover connection
• -50 to 250°C range
• 3-wire Pt100 element in simplex or duplex assembly

RTD with M12 Connector - COMPACT RTD SENSORS WITH TRANSMITTER

RCM212

• Integrated 4-20 mA transmitter
• -50 to 150°C range
• M12 connector with IP69K for electrical connections
• Operating pressure : 10 bar maximum

Duct Air Temperature RTD

RHV301 / RHV302

• 3-wire Pt100 element in simplex or duplex assembly
• ABS housing
• -20 to 65 °C

Outdoor Air Temperature RTD

RHV211 / RHV212

• 3-wire Pt100 element in simplex or duplex assembly
• ABS housing (IP65)
• 5 to 80 °C

Bayonet Thermocouple

TBC202 / TBC302 / TBC306 / TBC316

Sanitary RTD with Tri Clover Connection - Head Type

RH6*7

• 0.5” / 1” / 1.5” / 2 “ Triclover connections
• 2, 3 or 4-wire platinum element in simplex or duplex assembly
• -50 to 250°C

Sanitary RTD with Ingold Port

RHW604

• Ingold fitting for easy installation
• 2, 3 or 4-wire platinum element in simplex or duplex assembly
• -50 to 200°C

Standard Mineral Insulated RTD Assembly with Terminal Head

RHW50 Series

• Bendable sheath
• -50 to 400°C range
• SS316L sheath material

Mineral Insulated RTD-Transition Joint

RTJ500 / RTJ506

• Rugged Transition Joints
• -50 to 400°C
• SS316L sheath material

RTD sensor For Dry Heat Sterilizer (DHS)

RDH245

• For high pressures and temperatures
• -50 to 250°C
• 3-wire Pt100 element in simplex or duplex assembly

Thermocouple for Air and Gas

TG000

• Flowing non-corrosive air
• Up to 400°C
• Perforated tip for fast response

Acid and Alkali Thermocouple - Teflon Coated Sheath

TAA310

• For corrosive environments
• J, K & T type
• Up to 200°C

Heat Tracing RTD with Terminal Flameproof Head

RHT289 / RHT299

• For Heat Tracing systems
• -50 to 250°C
• Weatherproof die cast aluminum head

Slot RTD Sensors

RNS202

• Inserted between winding
• Upto 180°C
• Fiber body

RTD with Thermowell

RT

• Thermowell upto 4000mm
• -50 to 250 °C/ -50 to 400 °C
• 3-wire Pt100 element in simplex or duplex assembly

Flameproof RTD sensors - Mineral Insulated

RHF500 / RHF501 / RHF502 / RHF503 / RHF505 / RHF506 / RHF508 / RHF509

• Temperature measurement in hazardous environments
• Angular assemblies for complex installation
• 0 - 400 °C

Pipe Line RTD-Tri Clover Connection with Weld-In TEE

RPL602

• SS316L Weld-in TEE joint
• -50 to 250°C
• For pharmaceutical industries

Acid and Alkali RTD - With Teflon Protective Sleeve

RAA Series (RAA530/RAA532/RAA536)

• SS316L Teflon protective sleeve
• 3-wire Pt100 element in simplex or duplex assembly
• 0 to 200°C range

BAYONET THERMOCOUPLE ASSEMBLIES, ADJUSTABLE LENGTH

TPB216

• Supplied with ungrounded (isolated) hot junction
• Grounded hot junction optional
• Bayonet cap made of plated brass

HYGIENIC SENSOR FOR PIPE LINE

RTP502

• Maximum temperature : Probe : 200°C, Cable : 200°C
• Accuracy : Pt-100 element, IEC 60751 Class A
• Process connection : G 1/8” for mounting to weld-in boss or thermowell

RTD Sensors for Fermenters

RXF300

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient -50... +85°C
• Temperature range - sensors tip -50...+200°C

SANITARY RTD

RHS610

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• Head mounted transmitter with 4-20mA output
• Temperature range - ambient, -50... +85°C
• Temperature range - sensors tip, -50...+250°C
• Ra value <=0.51 micro m for wetted parts and <= 0.8 micro m for non wetted parts

SANITARY RTD

RHS600

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient, -50... +85°C
• Temperature range - sensors tip, -50...+250°C
• Roughness value (Ra) <= 0.8 micro m and <= 0.51 micro m for non wetted and wetted parts respectively

RTD SENSORS FOR FERMENTERS

RHF400

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient -50... +85°C
• Temperature range - sensors tip -50...+200°C

RTD with M12 Connector - COMPACT RTD SENSORS

RCM

• Pt-100, 4-wire
• -50...+200°C measuring range
• M12 connector with IP69K for electrical connection
• G½”, G¼”, ¼”NPT & ½”NPT adjustable fittings, SS316L

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCM216

• Integrated 4-20 mA transmitter
• Ranges from -50...+200°C
• Supply : 8...35VDC
• G1?2”, G1?4”, 1?4”NPT & 1?2”NPT adjustable fittings, SS316L
• M12 connector with IP69K for electrical connections

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP812

• Integrated 4-20 mA transmitter
• Ranges from 0...200°C with cooling neck
• Extremely Short response times

COMPACT RTD SENSORS With M12 Connector

RCP802

• Pt100, 4 wire
• -50...+200°C measuring range with cooling neck
• Extremely short response times

Standard RTD Assembly with Terminal Head

RHW200

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

Standard RTD Assembly with Terminal Head

RHW201

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

RTD Sensor - BAYONET RTD ASSEMBLIES, ADJUSTABLE LENGTH

RPB216

• Bayonet cap made of plated brass
• Standard sheath material : SS304
• Single element as standard
• Class A accuracy

RTD SENSORS FOR FERMENTERS

RHF410

• Pt100 3 wire Single / Dual Circuit, Class A accuracy
• Wetted parts made of SS316L
• Surface finish Ra ? 0.8 ?m (Standard)
• SS304 terminal head and Coupling nut

RTD WITH TERMINAL HEAD

RHW208

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

RTD WITH TERMINAL HEAD

RHW206

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

RTD WITH TERMINAL HEAD

RHW204

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring rangq
• SS316L (1.4404) sheath

RTD WITH TERMINAL HEAD

RHW202

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

SANITARY RTD WITH TRI CLOVER CONNECTION - HEAD TYPE

RHS602

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Wetted parts made of SS316L (1.4404)
• Die cast aluminum terminal head (IP68)

RTD WITH FLAMEPROOF TERMINAL HEAD

RHX20 Series

• RTD’s are terminated into Flameproof head suitable for using in hazardous area
• Standard Flameproof heads are certified for using in gas group IIB

Accessories for Standard RTD Assembly with Terminal Head

RHW ACCESSORIES

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP712

• Integrated 4-20 mA transmitter
• Ranges from -50...200°C with cooling fins
• For pipe lines from 15NB onwards
• Extremely Short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCP702

• Pt100, 4 wire
• Class A accuracy as standard, Class AA optional
• -50...+200°C measuring range with cooling fins
• Extremely short response times

SANITARY RTD WITHOUT PROTECTION SHEATH

RHS70 Series

• Offered with Sanitary SMS Connection with / without male part and gasket
• -50 to 250°C & -50 to 400°C
• Customized sheath lengths

RTD with M12 Connector - COMPACT RTD SENSORS WITH TRANSMITTER

RCP212

• Integrated 4-20mA transmitter
• Ranges from -50...+150°C
• For pipe lines from 15NB onwards
• Operating pressure : 50 bar maximum
• Extremely short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCM202

• Pt-100, 4-wire
• -50...+200°C measuring range
• M12 connector with IP69K for electrical connection
• G1/4”, G1/2”, 1/4”NPT & 1/2”NPT threads, SS316

RTD with M12 Connector - COMPACT RTD SENSORS WITH TRANSMITTER

RCM213

• Integrated 4-20 mA transmitter
• Ranges from -50...+150°C
• Supply : 8...35VDC
• Accuracy : < ±0.1% of measurement range *

Head Mount Temperature Transmitter

SCC643 Universal input

• Universal Input
• Non-Isolated
• Programmable

Head Mount Temperature Transmitter

SCC643

• TC, RTD Input
• Non-Isolated
• Programmable

Head Mount Temperature Transmitter

SCC671

• RTD Input
• Ultra fast
• Programmable RTD transmitter

PID Controllers - Economy Range

NEX30X

• Compact : 48x48x61, 48x96x35, 96x96x35
• 2 setpoints
• TC, RTD input

PID Controllers - Full Featured

NEX20X

RTD WITH TEFLON INSULATED OUTER SLEEVE

RAA43 series

• SS316L sheath with TEFLON protective sleeve
• Up to 200°C
• Non-bendable sheath

RTD with M12 Connector - COMPACT RTD SENSORS

RCM200

• Pt-100, 4-wire
• -50...+200°C measuring range
• M12 connector with IP69K for electrical connection

Acid and Alkali Thermocouple - WITH TEFLON INSULATED OUTER SLEEVE

TAA Series

• SS316 sheath with TEFLON protective sleeve
• Polypropylene head
• Bendable sheath

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP612

• Integrated 4-20 mA transmitter
• Ranges from -50...+150°C
• For pipe lines from 15NB onwards
• Extremely Short response times

COMPACT RTD SENSORS With M12 Connector

RCP602

• Pt100, 4 wire
• -50...+150°C measuring range
• Extremely short response times

COMPACT RTD SENSORS WITH TRANSMITTER

RCP412

• Integrated 4-20mA transmitter
• Ranges from -50...200°C with cooling neck
• Supply : 8...35 VDC
• For pipe lines from 15NB onwards
• Extremely Short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCP402

• Pt-100, 4-wire
• -50...+200°C measuring range with cooling fins
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum
• Extremely short response times

Compact Sensors For Pipeline - COMPACT RTD SENSORS WITH TRANSMITTER

RCP312

• Integrated 4-20mA transmitter
• Ranges from -50...200°C with cooling fins
• For pipe lines from 15NB onwards
• Extremely Short response times

RTD Sensors for Pipeline - COMPACT RTD SENSORS

RCP302H

• Pt-100, 4-wire
• -50...+200°C measuring range with cooling fins
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum

RTD with M12 Connector - COMPACT RTD SENSORS

RCP302

• Pt-100, 4-wire
• -50...+200°C measuring range with cooling fins
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum

RTD with M12 Connector - COMPACT RTD SENSORS

RCP202

• Pt100, 4 wire
• -50...+150°C measuring range
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum
• Extremely short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCP512

• Integrated 4-20 mA transmitter
• Ranges from -50...+160°C
• Highly accurate even with short insertion lengths
• Extremely short response times

RH+TEMPERATURE TRANSDUCER

RHT811 - With Display

• 2 x Analog outputs
• Accuracy : ± 2% RH, ± 0.5 °C
• Software calibration - no trimpots
• 18~30 V AC/DC supply
• PC programmable
• RS485 communication with MODBUS PROTOCOL

Acid and Alkali RTD - Anti-Corrosive Sheath

RAA900 / RAA902 / RAA920

• 3-wire Pt100
• 0 to 200°C
• Titanium sheath

Scanner

ISOSCAN

• 16 Channel Temperature Scanner

Digital Temperature Indicator

EK450

• J, K, Pt100
• 96x96

Digital Temperature Indicator

EK490

• J, K, Pt100
• 48x96

Digital Temperature Indicator

PRIMA 0SP

• J, K Pt100
• 96x96

Digital Temperature Controller

PRIMA 720

• J, K Pt100
• 72x72

Digital Temperature Controller

EK452

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

PRIMA 481

• J, K, Pt100, mA, mV
• 1 Setpoint
• 48x48

Digital Temperature Controller

PRIMA 1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK4SP

• J, K, Pt100, mA, mV
• 4 Setpoints
• 96x96

Blind Temperature Controller

ELEKTRA II

• J, K, Pt100
• 1 Setpoint
• 72x72

Blind Temperature Controller

C961

• J, K, Pt100
• 1 Setpoint
• 96x96

RH+T Transmitter

SC805

• Surface / Wall / Duct Mount
• LCD Display

RH+T Wet and Dry Bulb Controller

RHC201

• Wet and Dry Bulb %RH Controller

RH+T Wet and Dry Bulb Controller

RHC301

• Wet and Dry Bulb %RH Controller
• RS485

RH+T ON-OFF Controller

HX96A

• RH+T Controller
• 4 setpoints
• RS485

RH+T ON-OFF Controller

HTC96

• RH+T Controller
• 2 setpoints

RH+T Indicator

HT20

• RH+T Indicator
• Field/Wall mount

RH+T Transmitter

SC806 (Flameproof - Wall Mount)

• Wall Mount
• FLP

RH+T Transmitter

SC804

• Surface Mount
• FLP
• Dual Display

RH+T Transmitter

SC807

• Surface / Wall / Duct Mount

Digital Temperature Controller

EK2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK491

• J, K, Pt100 mA, mV
• 1 Setpoint
• 48x96

ON-OFF Controller

X96A

• 2 x universal input
• 4 Setpoints
• 96x96
• Dual Display indicator

ON-OFF Controller

X48A

• Universal input
• 3 Setpoints
• 48x48

PID Controller

X72

• Universal input
• 5 Setpoint
• 72x72

PID Controller

X96

• Universal Input
• 5 Setpoints
• 96x96

PID Controller

X96P

• 2 x Universal Inputs
• 5 Setpoints
• 96x96

PID Controller

P96

• Universal input
• 2 Setpoint
• 96x96

PID Controller

X94

• Universal input
• 4 Setpoint
• 96x48

PID Controller

X48

• Universal input
• 3 Setpoint
• 48x48

PID Controller

X49

• Universal input
• 4 Setpoint
• 48x96

ON-OFF Controller

X72A

• Universal input
• 4 Setpoints
• 72x72

ON-OFF Controller

X49A

• Universal input
• 3 Setpoints
• 48x96

Programmable Controller

TEC201

• Universal Input
• 2 Setpoints
• 48x96

Programmable Controller

EC96S

• J, K, Pt100
• 1 Setpoint
• 96x96

Programmable Controller

EC96

• J, K, Pt100
• 2 Setpoints
• 96x96

Programmable Controller

EC48

• J, K
• Pt100
• 2 Setpoints
• 48x48

Programmable Controller

TC96

• Universal input
• 2 Setpoints
• 96x96

Programmable Controller

TC72

• Universal input
• 2 Setpoints
• 72x72

Programmable Controller

TCP961

• Universal input
• 1 Setpoint
• 96x96

Programmable Controller

TC49SU

• Universal input
• 2 Setpoints
• 48x96

Programmable Controller

TCP962

• Universal input
• 2 Setpoints
• 96x96

Programmable Controller

TC48

• Universal input
• 2 Setpoints
• 48x48

PID Controller

P48

• Cost-effective PID Controller

Acid and Alkali RTD - With Teflon Coating

RAA310 / RAA312 / RAA320

• Titanium sheath with Teflon coating
• 3-wire Pt100 element in simplex or duplex assembly
• 0 to 200°C range

Flameproof Memory Timer

RCT605 (Flameproof)

• Multifunction Memory Timer
• IP65
• Gas Groups I, IIA and IIB

Flameproof Counter

RCT301 (Flameproof)

• Preset Counter with Rate Indicator
• IP65
• Gas Groups I, IIA and IIB

Flameproof Rate Indicator

RCT206 (Flameproof)

• RPM/RATE Indicator with Alarms
• IP65
• Gas Groups I, IIA and IIB

Flameproof Scanner

ISOSCAN (Flameproof)

• Multi-channel Scanner
• IP55
• Gas Groups I, IIA and IIB

Flameproof Differential Temperature Controller

X96 Delta (Flameproof)

• Differential Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Controller

TC48V3 (Flameproof)

• Programmable Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Controller

TEC302 (Flameproof)

• Programmable Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Programmable Indicator

TEC301 (Flameproof)

• Programmable Temperature Indicator
• IP65
• Gas Groups I, IIA and IIB

Flameproof ON-OFF Controller

TC96 (Flameproof)

• Programmable ONOFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Temperature Transmitter

TX3DR (Flameproof)

• 2-wire, Programmable
• Isolated Temperature Transmitter
• IP65, Gas Groups I, IIA and IIB (IIC optional)

Flameproof Temperature Transmitter

SCC633 (Flameproof)

• 2-wire Temperature Transmitter
• IP65
• Gas Groups I, IIA and IIB

Flameproof RH + T Transmitter

SC804 (Flameproof)

• 2-wire
• IP66
• Gas Groups I, IIA , IIB and IIC

Autoclave RTD

RAC244 / RT044

• For Continuous Sterilization Processes

Pipe Line RTD Sensor - Threaded Connection

RPL201

• For Pharmaceutical / Biopharmaceutical industries
• -50 to 250 °C
• Reduced sheath assembly for fast response

Differential Temperature Controller

X96 Delta

• Differential Temperature Controller

RH + T Handheld Thermometer

Humirad71

• RH+T Input

Universal Input Handheld Thermometer

Unirad

• Universal Input

TC K Handheld Thermometer

Digirad71

• TC K Input

Pt100 Handheld Thermometer

Accurad71

• Pt100 Input

Flameproof Loop-Powered Indicator

PLD40 (Flameproof)

• Loop Powered Indicator
• IP66
• Gas Groups I, IIA, IIB and IIC

Flameproof RH + T Transmitter

SC806 (Flameproof - Duct Mount)

• 2-wire RH+T Transmitter
• IP66
• Gas Groups I, IIA, IIB and IIC

Flameproof ON-OFF Controller

X48AV1 (Flameproof)

• Programmable ONOFF Controller
• IP65 rating
• Gas Groups I, IIA and IIB

Flameproof ON-OFF Controller

X96A (Flameproof)

• Programmable ONOFF Controller
• IP65
• Gas Groups I, IIA and IIB

Rate Indicator

RCT202

• Programmable RPM/RATE Indicators
• 48x96

Rate Indicator

RCT206

• RPM/RATE Indicator with Alarms
• 48x96

Analog Input Module

SCM201

• 8 channels, each with universal input
• Isolated RS485/MODBUS RTU, up to 57600 Baud
• Cost-effective Remote I/O for PLCs

Pipe Mount Temperature Transmitter

TX3DRB

• Isolated
• Universal input

DIN Rail Temperature Transmitter

TX2DR (TC/mV)

• Isolated
• TC/mV

Head Mount Temperature Transmitter-

SCC642

• RTD Input
• Non-Isolated
• Programmable

Head Mount Temperature Transmitter

SCC641

• Head mount
• 2-wire, 4~20mA output
• Universal input - Thermocouple, RTD, Resistance, Voltage

Head Mount Temperature Transmitter

TX1HM

• Pt100

Counter

RCT301

• Preset Counter with RPM/RATE Indicator
• 72x72

Counter

RCT403

• Preset Counter
• 72x72
• 6-digit pushwheel switch

Timers

RCT604

• Memory Timer
• 72x72
• 2 setpoints

Flameproof PID Controller

X96P (Flameproof)

• Autotune PID Controller
• IP65
• Gas Groups I, IIA and IIB

Timers

RCT703

• Non-memory Timer
• 72x72
• 1 setpoint

Timers

RCT606

• Memory Timer
• 72x72
• 1 setpoints

Timers

RCT605

• Memory Timer
• 72x72
• 2 setpoints, 3 modes

Timers

RCT701

• Non-memory Timer
• 48x48
• 2 setpoints

Timers

RCT601

• Memory Timer
• 48x48
• 2 setpoints

Scanner

ISOTHERM

• 8 Channel Temperature Scanner