Pneumatic Hand Pump

Model PHP

• Generates Pressures up to 600 psi (40 bar)
• Portable

Calibration Pump

Model A-396A

• Generates up to 72 psig
• Integral Bleed Fitting

Compact USB Data Logger

Series DW-USB

• Measure Temperature, Humidity, Dew Point, Current, Voltage, or Carbon Monoxide

Universal Input Data Logger

Series UDL

• Internal Temperature Sensor
• Optional Internal Humidity Sensor and Display

Battery Powered Temperature Indicator

Series BPI

• RTD or T/C Input
• 4-Digit Display
• Selectable °F or °C

Loop Powered Indicator

Model LPI

• Square Root Function
• 4-Digit LED

Infrared Non-Contact Thermometer

Model IR2

• 12:1 Distance-to-Target Ratio
• Laser Sighting

Two-Way Zone Valve

Series ZV1

• Economical
• Manual Override

Flameproof RTD sensors - Angular Assembly

RHF210 / RHF216 / RHF219

• Temperature measurement in hazardous environments
• Angular assemblies for complex installation
• 0 - 250 °C

SIDE MOUNTING LEVEL SWITCH PIVOTED TYPE

SPS201

Graphic Operation Terminal - HMI

GT14

Programmable Logic Controller

FX

Weatherproof Immersion Temperature Sensor

Series I2-4

• Twist Off Cover
• Multiple Conduit Holes

General Purpose Immersion Temperature Sensor

Series I2-2

• Locking Screw Cover
• Multiple Conduit Holes

Tridicator Gage

Series TRI2

• Combination Pressure/Temperature Gage

Utility Gage

Series UGJ

• 2" Dials
• Dual PSI/Bar x 100 kPa Scales

2.5" Utility Pressure Gage

Series UGK

• 1.5% FS Accuracy
• Brass Wetted Parts
• Dual PSI/Bar x100 kPa Scales

Utility Gage

Series UGI

• 1.5" Dials with Back Connection
• Dual PSI/Bar x100 kPa Scales

2.5" Stainless Steel Industrial Pressure Gage

Series SGZ

• 1.5% FS Accuracy
• 316 SS Wetted Parts
• Dual PSI/Bar x100 kPa Scales

2.5" Stainless Steel Industrial Pressure Gage

Series SGY

• 1.5% FS Accuracy
• Brass Wetted Parts
• Dual PSI/Bar x100 kPa Scales

1.5" Stainless Steel Industrial Pressure Gage

Series SG3

• 2.5% FS Accuracy
• 316 SS Wetted Parts
• Dual psi/bar x100kPa scale

1.5" Stainless Steel Industrial Pressure Gage

Series SG1

• 2.5% FS Accuracy
• Brass Wetted Parts
• Dual PSI/Bar x100 kPa Scales

Molded Plastic Manometer

Series Mark II

Low Pressure Gage

Series LPG5

Low Pressure Gage

Series LPG3

• 1% Full Scale Accuracy

Low Pressure Gage

Series LPG4

• 1.5% Full Scale Accuracy

Hazardous Area Humidity/Temperature Transmitter

Series HHT

• Intrinsically Safe
• Explosion-Proof Models

Explosion-Proof RTD Temperature Transmitter

Series TTE

• User Selectable Ranges
• Optional LCD Display

Vane Flow Switch

Series FS-2

• Low Cost
• Field Adjustable Set Point and Paddle

Digital Calibration Pressure Gage

Series DCGII

• ±0.05% FS Accuracy
• 316 SS Wetted Parts

Tridicator Gage

Series TRI

• Combination Pressure/Temperature Gage

Stainless Steel Low Pressure Schaeffer Gage

Series SGP

• 1.6% Full Scale Accuracy
• 316 & 316L SS Wetted Parts

Stainless Steel Schaeffer Gage

Series SGO

• 1.6% Full Scale Accuracy
• 316L SS & PTFE Wetted Parts

Stainless Steel Low Pressure Gage

Series SGX & SGF

• Brass or 316 SS Wetted Parts

Compact Size, 1" Dial

Series SGC2

• Spiral Tube Pressure Gage

Gas Pressure Manometer

Series 1213

ANALOG INPUT MODULE WITH ETHERNET PORT

SCM203

• 8 universal analog inputs
• MODBUS / TCP & Telnet multidrop communication

Ultrasonic Level Transmitters

ULT202 / ULT211 / ULT212

Series EFS2 Insertion Electromagnetic Flow Sensor

EFS2-1B / EFS2-1P / EFS2-1S

• No Moving Parts
• Durable
• Easy Installation & Maintenance

Series HFT In-Line Flow Transmitter

HFT-1112 / HFT1113

• Local Flow Indication Unrestricted Mounting Output : 4-20 mA, 0-5 V, and 1-5 V

Turbine, Adjustable Insertion

Series TFP LI / LP, Series TFM LI / LP, Series TFP GI / GV

• Available as Liquid/Gas Turbine flowmeters, 316SS Body, PPS Body, 0 to 5 VDC Output, LCD Indication

Series ILA In-Line IR Sensor

Series ILA

• 15:1 Distance to Target Ratio
• 32 to 932°F

Series GFM4 Gas Mass Flow Meter

Series GFM4

Series GFM2 Gas Mass Flow Meter

Series GFM2

Series DMF Digital Mass Flow Controller

Series DMF

Series GFC Gas Mass Flow Controller

Series GFC 11XX

Radar Level Transmitters - Contact Type

RLT201

• Contact type measurement
• Measuring range up to 30 meter
• Exproof

Submersible Level Transmitters

SLT201

Float Guided Level Switches

FGS201 / FGS202 / FGS203 / FGS204 / FGS205 / FGS206 / FGS207

• Rugged construction
• Easy mounting with flanged or threaded connection
• Multilevel monitoring upto 4 levels
• Weatherproof
• Exproof

Displacer level switch

DLS201

• Suitable for narrow and wide level ranges
• Range : Upto 15 mtrs
• Adjustable setpoints
• Suitable for viscous and slurry type liquids

FLOAT & BOARD LEVEL GAUGE

FBG201

Tubular level gauge

TBG201

Surface Temperature RTD Sensors- Washer Type

RST202 / RST203

• Easy to install & replace
• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• -50 to 250°C range
• SS304 washer

Transition Joint RTD Sensors - Reduced Tip

RTJ220

• Platinum RTD in 2/3/4-wire configuration with single/dual elements in Class B/Class A
• -50 to 250°C range
• Integral cable makes the assembly lighter and easy to install
• Reduced tip design for faster response

Magnetic Level Gauge

MLG201

Reflex Level Gauge

RLG201

Cable Float Switches (Tilt Level Switches)

CFS201

Series GFM Gas Mass Flow Meter

GFM 11XX

Series SFI-400 MIDWEST Sight Flow Indicator

Series SFI 400

Laser Welded Flush Flanged Chemical Seal Unit

CSU900

• For High Pressure Applications
• SS316L / Hastalloy / Tantallum Diaphragm
• Up to 6000 psi / 420 kg/cm²

Flushed Flange Chemical Seal Unit

CSU500

• High Pressure Applications
• All stainless steel design
• Up to 1000 psi / 70 kg/cm²

Welded Chemical Seal Unit

CSU400

• For High Pressure Applications
• All-SS Welded Construction
• Up to 6000 psi / 420 kg/cm²

SS304 Tension Flange Chemical Seal Units

CSU300

• For High Pressure Applications
• Bolted Construction
• Up to 3000 psi / 210 kg/cm²

Flow Rate Indicator-Totalizers

FLT601

• Inputs : 0/4~20 mA, 0~5, 1~5, 0~10 volts
• Square-root option
• 6-digit Rate Indicator, 8-digit Totalizer(Totaliser)
• Four setpoints each assignable to either flow rate or totalizer(Totaliser)
• Programmable flow rate, setpoints and relay modes, etc.

Flow Rate Indicator-Totalizers

FLT401

• Inputs : 0 / 4~20 mA, 0~5, 1~5, 0~10 volts
• Square-root option
• 4-digit Rate Indicator, 6-digit Totalizer(Totaliser)
• Four setpoints each assignable to either flow rate or totalizer(Totaliser)
• Programmable flow rate, setpoints and relay modes, etc.

3-Port Signal Isolator

SI3P

• Voltage, Current, TC/RTD, ohms etc

Sight Flow Indicator MIDWEST

SFI 100 / SFI 300

Series 500 Sight Window

Series 500 Sight Window

Flowmeter with Switch output

Series FS / Series HFO

Orifice Plate

Series PE & TE / Series OP

• Orifice plate differential pressure sensors for flow rate.

Flow Totalizers

Model TM2 / Series GFT2 / Series RTI

• Flow sensors with flow totalizing capability.

In line flow rate meter

Series HF / HFPC / HFPS / SSM / PVF / CPF / TVF / STFLO / P72

Flowmeter Dial

Series RMV / RMVII / DTFA / DTFO / DTFF / DTFW

In line flow sensor (Averaging Pitot tube)

DS300 / DS400

• The Dwyer® flow sensor eliminates the need for "traversing" the flowing stream because of its multiple sensing points and built-in averaging capability.

Analog Input Modules with Channel-to-channel Isolation

SCM211

• 4 channels, each with isolated universal input
• Channel-to-channel isolation of 300 V AC
• Isolated RS485/MODBUS RTU
• Cost-effective Remote I/O For PLCs

Flameproof Programmable Indicator

TEC301 (Flameproof)

• Programmable Temperature Indicator
• IP65
• Gas Groups I, IIA and IIB

Signal Isolator

MSI4P

• AC current/voltage input
• Dual output

Signal Isolator

SCC401

• Voltage, Current, TC/RTD, Ohms, etc

Full Featured Calibrator

RADICAL

• Full-Featured Calibrator
• Long Battery Life
• High Accuracy

Cost Effective Calibrator

MICROCAL

• Multiple Operational Modes
• Many Inputs Accepted
• High Accuracy

Pipe Mount Temperature Transmitter

TX3DRB

• Isolated
• Universal input

DIN Rail Temperature Transmitter

TX2DR (TC/mV)

• Isolated
• TC/mV

DIN Rail Temperature Transmitter

TX2DR (Pt100)

• Isolated
• Pt100

Miniature Chemical Seal Unit

CSU800

• Miniature seal units for pressure transmitters
• Up to 200 psi / 14 kg/cm²

Scanner

ISOTHERM

• 8 Channel Temperature Scanner

Signal Isolator

MSI7P

• Universal input
• 5 outputs
• Integral LCD

Signal Isolator

MSI7PB

• Carbon potential transmitter

Signal Isolator

MSI7PC

• Oxygen lambda sensor

Flameproof ON-OFF Controller

X96A (Flameproof)

• Programmable ONOFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof PID Controller

X96P (Flameproof)

• Autotune PID Controller
• IP65
• Gas Groups I, IIA and IIB

Timers

RCT703

• Non-memory Timer
• 72x72
• 1 setpoint

Timers

RCT601

• Memory Timer
• 48x48
• 2 setpoints

Counter

RCT404

• Preset Counter
• 72x72
• 4-digit pushwheel switch

Rate Indicator

RCT206

• RPM/RATE Indicator with Alarms
• 48x96

Analog Input Module

SCM201

• 8 channels, each with universal input
• Isolated RS485/MODBUS RTU, up to 57600 Baud
• Cost-effective Remote I/O for PLCs

Loop Powered Indicator

PLD40B

• Panel mount
• Programmable

Loop Powered Indicator

PLD40A

• Field / wall mount
• Programmable

Scanner

ISOSCAN

• 16 Channel Temperature Scanner

RH+T ON-OFF Controller

HTC96

• RH+T Controller
• 2 setpoints

Programmable Controller

TCP961

• Universal input
• 1 Setpoint
• 96x96

Programmable Controller

TC49SU

• Universal input
• 2 Setpoints
• 48x96

Programmable Controller

TC48

• Universal input
• 2 Setpoints
• 48x48

Programmable Controller

TEC201

• Universal Input
• 2 Setpoints
• 48x96

ON-OFF Controller

X72A

• Universal input
• 4 Setpoints
• 72x72

PID Controller

X72

• Universal input
• 5 Setpoint
• 72x72

PID Controller

X96

• Universal Input
• 5 Setpoints
• 96x96

PID Controller

P96

• Universal input
• 2 Setpoint
• 96x96

PID Controller

X94

• Universal input
• 4 Setpoint
• 96x48

Programmable Controller

TC72

• Universal input
• 2 Setpoints
• 72x72

Programmable Controller

TC96

• Universal input
• 2 Setpoints
• 96x96

Programmable Controller

EC396

• J, K, Pt100
• 1 Setpoint
• 96x96

Digital Temperature Indicator

EK450

• J, K, Pt100
• 96x96

Digital Temperature Indicator

EK490

• J, K, Pt100
• 48x96

Digital Temperature Indicator

PRIMA 0SP

• J, K Pt100
• 96x96

Digital Temperature Controller

PRIMA 480

• J, K, Pt100
• 48x48

Digital Temperature Controller

EK1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK4SP

• J, K, Pt100, mA, mV
• 4 Setpoints
• 96x96

Digital Temperature Controller

EK2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Programmable Controller

EC96

• J, K, Pt100
• 2 Setpoints
• 96x96

PID Controller

X48

• Universal input
• 3 Setpoint
• 48x48

Flameproof Differential Temperature Controller

X96 Delta (Flameproof)

• Differential Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Durablock® Solid Plastic Portable Gage

Series 100

Heat Tracing RTD with Terminal Flameproof Head

RHT289 / RHT299

• For Heat Tracing systems
• -50 to 250°C
• Weatherproof die cast aluminum head

Standard RTD Assembly with Terminal Head

RHW200 / RHW201 / RHW204 / RHW206 / RHW208 / RHW209

• Weatherproof Die cast aluminum head
• -50 to 250°C
• 2, 3 or 4-wire platinum element in simplex or duplex assembly

Flameproof RTD Sensors - Standard Assembly

RHF200 / RHF204 / RHF206 / RHF208 / RHF209

• For hazardous areas
• Certified for gas groups I, IIA and IIB (IIC optional)
• Impact and Vibration resistant

Flameproof RTD sensors - Mineral Insulated

RHF500 / RHF501 / RHF502 / RHF503 / RHF505 / RHF506 / RHF508 / RHF509

• Temperature measurement in hazardous environments
• Angular assemblies for complex installation
• 0 - 400 °C

Dipstick RTD For Engine Oil Temperature Measurement

RDS200

• For Automobile industry
• -20 to 150 °C
• Easy insertion

Pipe Line RTD-Tri Clover Connection with Weld-In TEE

RPL602

• SS316L Weld-in TEE joint
• -50 to 250°C
• For pharmaceutical industries

Pipe Line RTD - Tri Clover Connection With Clamp-In TEE

RPL601

• 0.5”/1”/1.5 /2” Tri clover connections
• -50 to 250°C
• For pharmaceutical industries

Acid and Alkali Thermocouple - Teflon Coated Sheath

TAA310

• For corrosive environments
• J, K & T type
• Up to 200°C

Low Cost Thermocouple

TL200

• Low cost varieties
• Class 2 (IEC) grade thermocouple wires
• Up to 300°C

Bimetallic Dial Thermometer (Temperature Gauge)

TGB200

• Bimetallic sensing element
• 2.5” / 4” / 6” dial sizes
• -50 °C to 400 °C

Precision Digital Pressure Manometer

Series HM35

Handheld Digital Manometer

Series HM28

Wet/Wet Handheld Digital Manometer

Series 490

• Liquid & Gas Pressure Measurement
• ±0.5% F.S. Accuracy

Handheld Digital Manometer

Series 477A

• Precise Air Pressure Measurement
• ±0.1% F.S. Accuracy

Handheld Digital Manometer

Series 477

• Selectable Pressure Units
• ±0.5% Accuracy

Digital Manometer

Series 476A & 478A

Mark III Handheld Digital Manometer

Series 475

Magnehelic® Differential Pressure Indicating Transmitter

Series 605

Electrical contact Temperature Gauge

G Series

• Max. 250 V, 1 Amp rated power
• Magnetic snap action contact
• 100 and 150 mm dial sizes

Standard Mineral Insulated RTD Assembly with Terminal Head

RHW500 / RHW501 / RHW502 / RHW503 / RHW505 / RHW506 / RHW508 / RHW509

• Bendable sheath
• -50 to 400°C range
• SS316L sheath material

Quick Disconnect RTD - Tri-Clamp M12 Connector

RCM607 / RCM617

• 1” / 1.5”/ 2” Triclover connection
• -50 to 250°C range
• 3-wire Pt100 element in simplex or duplex assembly

Differential Temperature Controller

X96 Delta

• Differential Temperature Controller

TC K Handheld Thermometer

Digirad71

• TC K Input

Pt100 Handheld Thermometer

Accurad71

• Pt100 Input

Flameproof Loop-Powered Indicator

PLD40 (Flameproof)

• Loop Powered Indicator
• IP66
• Gas Groups I, IIA, IIB and IIC

Flameproof RH + T Transmitter

SC806 (Flameproof)

• 2-wire RH+T Transmitter
• IP66
• Gas Groups I, IIA, IIB and IIC

Flameproof RH + T Transmitter

SC804 (Flameproof)

• 2-wire
• IP66
• Gas Groups I, IIA , IIB and IIC

Flameproof Temperature Transmitter

TX1HM (Flameproof)

• 2-wire Temperature Transmitter
• IP65
• Gas Groups I, IIA and IIB

Flameproof Temperature Transmitter

TX3DR (Flameproof)

• 2-wire, Programmable
• Isolated Temperature Transmitter
• IP65, Gas Groups I, IIA and IIB (IIC optional)

Flameproof Counter

RCT301 (Flameproof)

• Preset Counter with Rate Indicator
• IP65
• Gas Groups I, IIA and IIB

Pipe Line RTD Sensor - Threaded Connection

RPL201

• For Pharmaceutical / Biopharmaceutical industries
• -50 to 250 °C
• Reduced sheath assembly for fast response

Industrial Use Bourdon Pressure Gauge

PGB300

• Non-corrosive Media
• Liquid filled to dampen vibration(PGB301)
• Weatherproof with IP68 rating
• 0-1000 kg/cm²

High Pressure Sealed gauge

PGS300 / PGS301 / PGS310 / PGS311

• 0…210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For corrosive gases, liquids and viscous media

RTD with M12 Connector - Fixed Threaded Connection

RCM202 / RCM212 / RCM222

• 4-pin M12 plug-in connector
• -50 to 250°C range
• 3-wire Pt100 element in simplex or duplex assembly

Bayonet Thermocouple

TBC202 / TBC302 / TBC306 / TBC316

Acid and Alkali RTD - With Teflon Protective Sleeve

RAA530

• SS316L Teflon protective sleeve
• 3-wire Pt100 element in simplex or duplex assembly
• 0 to 200°C range

Acid and Alkali RTD - Anti-Corrosive Sheath

RAA900 / RAA902 / RAA920

• 3-wire Pt100
• 0 to 200°C
• Titanium sheath

General Purpose Bourdon Pressure Gauge (Liquid filled)

PGB301

• 0 to 1000 Kg/cm²
• Non-corrosive Gases and Liquid Media
• Copper alloy wetted parts
• 50,63 100 and 150mm dial size

Low Pressure Diaphragm Gauge

PGD500 / PGD506

• Low pressure upto 1000mbar
• SS 316L diaphragm
• Economy version

Economy Sealed Gauge - With Cup Type Tension flange

PGS200 / PGS201 / PGS210 / PGS211

• 0 to 16 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For non corrosive gases and liquids
• Diaphragm: SS316L with Teflon protection

Flanged Sealed Gauge with I-Section Sealed Unit

PGS600 / PGS601 / PGS610 / PGS611

• 0-210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316L Teflon protected
• I section type bolted construction

Flanged Sealed Gauge with Bolted Sealed Unit

PGS500 / PGS501 / PGS510 / PGS511

• 0-70 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• Diaphragm material, SS316L Teflon protected
• Flush type bolted construction
• For corrosive gases, liquid, viscous media

Flameproof Scanner

ISOSCAN (Flameproof)

• Multi-channel Scanner
• IP55
• Gas Groups I, IIA and IIB