USB TO HART CONVERTER - ISOLATED

DCC503

• Complete HART device interface
• Complies with HART physical layer
• Provide 2 KV isolation between PC and HART instrument that eliminate grounding effect

Magnetic Level Gauge

MLG201

• Rugged construction
• Easy mounting with flanged connection
• Low maintenance
• Continuous level monitoring (with use of transmitter 4-20mA output)

Reflex Level Gauge

RLG201

• For Visual Indication
• Flanged, Threaded Unions, Butt Weld Ends Connection
• Process connection orientation : Side/side, top/bottom with back/back

Cable Float Switches (Tilt Level Switches)

CFS201

• Low cost polypropylene level switch
• Hermetically sealed/moulded
• Microswitch operated

Float Guided Level Switches

FGS201 / FGS202 / FGS203 / FGS204 / FGS205 / FGS206 / FGS207

• Rugged construction
• Easy mounting with flanged or threaded connection
• Multilevel monitoring upto 4 levels

Submersible Level Transmitters

SLT201

• 2 wire, 4 to 20 mA output
• Fully sealed IP68 sensor for permanent submersion
• Special polyurethane cable ensures more flexibility and durability.
• SS316 Construction

Radar Level Transmitters - Contact Type

RLT201

• Contact type measurement
• Measuring range up to 30 meter
• Exproof

Ultrasonic Level Transmitters

ULT202 / ULT211 / ULT212

• ULT202, ULT212 : 0.4m ~ 10m for liquids
• ULT212 : 4~20mA or 4~20mA/HART
• Process connection : M66×2 or flange

PROGRAMMABLE SIGNAL ISOLATOR

SCC313

• Universal Input
• Dual Output
• Fast Response

Analog Input Modules with Channel-to-channel Isolation

SCM211

• 4 channels, each with isolated universal input
• Isolated RS485/ MODBUS RTU, upto 57600 BAUD RATE
• Channel-to-channel isolation of 300 V AC
• Cost-effective Remote I/O For PLCs
• Powerful, flexible SCADA software
• Tmax version with 4~20 mA

Transition Joint RTD Sensors - Reduced Tip

RTJ220

• Platinum RTD in 2/3/4-wire configuration with single/dual elements in Class B/Class A
• -50 to 250°C range
• Integral cable makes the assembly lighter and easy to install
• Reduced tip design for faster response

RS232 TO RS485/RS422 CONVERTER

DCC301

• Transmission rate : 300 - 115200bps
• Transmission distance : RS485 1200m, RS232 5m
• Working mode : asynchronous, half duplex, differential transmission
• Supports 32 nodes on RS485 bus
• 3-port isolation between Power Supply, RS232, RS485 & RS422

SERIAL TO ETHERNET CONVERTER WITH DUAL MASTERS

DCC211

AC/DC CURRENT/VOLTAGE TRANSDUCER

SCC314

• AC/DC Input
• Dual Output
• RS485

USB TO SERIAL CONVERTER - ISOLATED

DCC501

• Compatible with USB 2.0
• 12Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission
• LEDs for indicating USB and TxD/RxD activity
• 2 kV isolation between PC and the instrument being programmed
• Din rail and surface mount

SERIAL TO ETHERNET CONVERTER WITH PoE

DCC202

• 10/100 Mbps Ethernet port
• Browser based configuration utility
• Telnet, TCP Modbus protocols
• Serial interface : RS232, RS485, RS422

ANALOG INPUT MODULE WITH ETHERNET PORT

SCM203

• 8 universal analog inputs
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

Displacer level switch

DLS201

• Suitable for narrow and wide level ranges
• Range : Upto 15 mtrs
• Adjustable setpoints
• Suitable for viscous and slurry type liquids

FLOAT & BOARD LEVEL GAUGE

FBG201

• Simple
• Easy mounting
• Low maintenance
• Economical measurement solution

Tubular level gauge

TBG201

• Rugged construction
• Easy mounting
• Low maintenance
• Direct visible level indication
• Economical measurement solution

Surface Temperature RTD Sensors- Washer Type

RST202 / RST203

• Easy to install & replace
• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• -50 to 250°C range
• SS304 washer

HART® Communication Protocol Software

Model DevCom2000

Magnehelic® Differential Pressure Indicating Transmitter

Series 605

Low Range Differential Pressure Transmitter

Series 607

Electrical contact Temperature Gauge

G Series

• Max. 250 V, 1 Amp rated power
• Magnetic snap action contact
• 100 and 150 mm dial sizes

Acid and Alkali Thermocouple - Teflon Protective Sleeve

TAA530

• For Corrosive Environments
• Up to 200°C

Thermocouple for Deep freezer and Lyophilzation

TFL248 now as RFL258

• Teflon coating
• -100 to 200°C
• SS316L sheath

Mineral Insulated Thermocouple

TCMI

• Compact inorganic insulation (MgO)
• Range of dia
• Fast response

Noble Metal Platinum Thermocouple Assemblies

TH500

• Noble metal platinum conductor
• Up to 1700 °C
• R, S & B calibrations

Multisheathed Thermocouples with Metallic Outer Sheath & Ceramic Inner Sheath

TM501

• Used in toxic gases at high temperatures
• High quality ceramic inner sheath
• Resistant to thermal shocks

Low Cost Thermocouple

TL200

• Low cost varieties
• Class 2 (IEC) grade thermocouple wires
• Up to 300°C

RTD with Lemo Connector

RCL607 / RCL617

• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• Other calibrations & higher accuracies on request
• -50 to 250°C range
• 0.5” / 1” / 1.5” / 2 “ Triclover connections

GPS Slave Clock

GSC401 - FLP Slave

• Time format : 4 digit (HH:MM)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC401 - Ethernet Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - Ethernet (10/100 Base-TX, 8-pin RJ-45X1)
• Power supply : 85-265 VAC

GPS Slave Clock

GSC301 - FLP Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - Ethernet Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - Ethernet _10/100 Base-TX, 8-pin RJ-45X1)
• Power supply : 85-265 VAC

GPS Slave Clock

GSC401 - RS485 Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RS485
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RS485 Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RS485
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RF Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

Dial Thermometer - Gas Filled (Temperature Gauge)

TGN200

SIDE MOUNTING LEVEL SWITCH PIVOTED TYPE

SPS201

• Process Connection: threaded BSP, NPT / flanged / triclover
• Switch rating :0.1 - 5 amps@250V AC

Heat Tracing RTD with Terminal Flameproof Head

RHT289 / RHT299

• For Heat Tracing systems
• -50 to 250°C
• Weatherproof die cast aluminum head

Liquid Filled Dial Thermometer

Liquid Filled

• Fast Response
• Suitable for sanitary application
• All SS construction
• Rigid stem or Capillary type

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX504

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX503

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX502

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX500

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

FLAMEPROOF SANITARY RTD

RXS610

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Wetted parts made of SS316L (1.4404)
• Flameproof dia cast aluminum terminal head (IP68)

Flameproof Sanitary RTD

RXS600

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Wetted parts made of SS316L (1.4404)

RTD WITH TERMINAL HEAD

RHW206

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

RTD WITH TERMINAL HEAD

RHW204

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring rangq
• SS316L (1.4404) sheath

TRANSITION JOINT ASSEMBLIES

RTJ20 SERIES

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) Sheath material

RTD WITH FLAMEPROOF TERMINAL HEAD

RHX20 Series

• RTD’s are terminated into Flameproof head suitable for using in hazardous area
• Standard Flameproof heads are certified for using in gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX505

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX506

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

Bimetal Dial Thermometers

BEA Bimetal

• Coiled bi-metal sensing element
• All stainless steel construction
• -40 to 400 °C

Multi-Channel Scanner

ISOSCAN-V

• 16 Channel Temperature Scanner
• Non-volatile memory for parameters - no batteries
• 3 key, 5 level programming
• Setpoint and level locks

Multi-Channel Scanner

ISOSCAN-H

• 16 Channel Temperature Scanner
• RS485 with MODBUS RTU
• Powerful, flexible SCADA software available

GPS Master-Slave Clock

GMC203 (Master)

• Time format : 6 digit (HH:MM:SS)
• Time source : GPS, NTP
• Isolation power supply and RS485 : 2000VAC, RMS, 1 minute

8 Channel Scanner

UMX201

• 8 universal analog inputs
• Maximum 4 or 8 relay outputs
• 85~265 VAC or 18~35 V DC supply

GPS Slave Clock

GSC401 - RF Flush Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RF Flush Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC401 - RF Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

GPS Master Clocks

GMC201 (Master)

• Power supply : 85~265 VAC / 50Hz
• Communication interface : RF wireless, RS485 (MODBUS RTU)
• Protocol : Proprietary
• Parameter configuration : PC based utility

RTD WITH M12 CONNECTORS

RCM206

• Pt-100, 4-wire
• Class A accuracy as standard
• -70...+200°C measuring range

RTD WITH TERMINAL HEAD

RHW207

• Non-bendable sheath
• -50 to 250°C range
• Standard lengths are 100, 150 & 300mm. Longer assemblies not recommended

Accessories for Standard RTD Assembly with Terminal Head

RHW ACCESSORIES

Standard RTD Assembly with Terminal Head

RHW201

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

Compact Sensors For Pipeline - COMPACT RTD SENSORS WITH TRANSMITTER

RCP312

• Integrated 4-20mA transmitter
• Ranges from -50...200°C with cooling fins
• For pipe lines from 15NB onwards
• Extremely Short response times

RTD Sensors for Pipeline - COMPACT RTD SENSORS

RCP302H

• Pt-100, 4-wire
• -50...+200°C measuring range with cooling fins
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum

RTD with M12 Connector - COMPACT RTD SENSORS

RCP302

• Pt-100, 4-wire
• -50...+200°C measuring range with cooling fins
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum

RTD with M12 Connector - COMPACT RTD SENSORS

RCP202

• Pt100, 4 wire
• -50...+150°C measuring range
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum
• Extremely short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCP512

• Integrated 4-20 mA transmitter
• Ranges from -50...+160°C
• Highly accurate even with short insertion lengths
• Extremely short response times

Acid and Alkali Thermocouple - WITH TEFLON INSULATED OUTER SLEEVE

TAA Series

• SS316 sheath with TEFLON protective sleeve
• Polypropylene head
• Bendable sheath

Head Mount Temperature Transmitter

SCC643

• RTD Input
• Non-Isolated
• Programmable

Float Guided Level Transmitters

FGT201

Float Guided Level Switches

FG202

RTD with M12 Connector - COMPACT RTD SENSORS

RCP402

• Pt-100, 4-wire
• -50...+200°C measuring range with cooling fins
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum
• Extremely short response times

COMPACT RTD SENSORS WITH TRANSMITTER

RCP412

• Integrated 4-20mA transmitter
• Ranges from -50...200°C with cooling neck
• Supply : 8...35 VDC
• For pipe lines from 15NB onwards
• Extremely Short response times

Standard RTD Assembly with Terminal Head

RHW200

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

Standard RTD Assembly with Terminal Head

RHW20 Series

• -50 to 250°C range
• Standard Lengths are 100, 150, 200 & 300mm longer assemblies not recommended

HYGIENIC SENSOR FOR PIPE LINE

RTP502

• Maximum temperature : Probe : 200°C, Cable : 200°C
• Accuracy : Pt-100 element, IEC 60751 Class A
• Process connection : G 1/8” for mounting to weld-in boss or thermowell

RTD for Lyophilizer and Deep Freezer

RFL258

• Teflon coating
• -100 to 200°C
• SS316L sheath

RTD with M12 Connector - COMPACT RTD SENSORS

RCM

• Pt-100, 4-wire
• -50...+200°C measuring range
• M12 connector with IP69K for electrical connection
• G½”, G¼”, ¼”NPT & ½”NPT adjustable fittings, SS316L

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP812

• Integrated 4-20 mA transmitter
• Ranges from 0...200°C with cooling neck
• Extremely Short response times

COMPACT RTD SENSORS With M12 Connector

RCP802

• Pt100, 4 wire
• -50...+200°C measuring range with cooling neck
• Extremely short response times

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP712

• Integrated 4-20 mA transmitter
• Ranges from -50...200°C with cooling fins
• For pipe lines from 15NB onwards
• Extremely Short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCP702

• Pt100, 4 wire
• Class A accuracy as standard, Class AA optional
• -50...+200°C measuring range with cooling fins
• Extremely short response times

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP612

• Integrated 4-20 mA transmitter
• Ranges from -50...+150°C
• For pipe lines from 15NB onwards
• Extremely Short response times

COMPACT RTD SENSORS With M12 Connector

RCP602

• Pt100, 4 wire
• -50...+150°C measuring range
• Extremely short response times

SIGNAL ISOLATOR, DUAL OUTPUT

SI4P

• 0/4~20 mA input
• Line fault detection

Signal Isolator

SCC401

• Voltage, Current, TC/RTD, Ohms, etc

RH+T Transmitter

SC807

• Surface / Wall / Duct Mount

RH+T Transmitter

SC805

• Surface / Wall / Duct Mount
• LCD Display

Blind Temperature Controller

C961

• J, K, Pt100
• 1 Setpoint
• 96x96

Digital Temperature Indicator

EK490

• J, K, Pt100
• 48x96

Digital Temperature Indicator

PRIMA 0SP

• J, K Pt100
• 96x96

Digital Temperature Controller

PRIMA 720

• J, K Pt100
• 72x72

RH+T Wet and Dry Bulb Controller

RHC301

• Wet and Dry Bulb %RH Controller
• RS485

Flameproof Pipe Mount Temperature Transmitter

TX3DRB

• 14~32 V DC loop supply
• Isolation : 1000 V AC RMS, 50 hz/1 minute
• 4~20 mA or 20~4 mA selection for output
• Linear mode & Square root mode option for linear input

DIN Rail Temperature Transmitter

TX2DR (TC/mV)

• Isolated
• TC/mV

Head Mount Temperature Transmitter-

SCC642

• RTD Input
• Non-Isolated
• Programmable

Loop Powered Isolator

LPI61

• Loop Drop 5V
• Load 0 - 600 Ohms without load trimming

Loop Powered Isolator

LPI51

• Loop Drop 3.7V
• Load 25 - 375 Ohms

Digital Temperature Controller

EK1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 481

• J, K, Pt100, mA, mV
• 1 Setpoint
• 48x48

Digital Temperature Controller

PRIMA 1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK4SP

• J, K, Pt100, mA, mV
• 4 Setpoints
• 96x96

Digital Temperature Controller

EK2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Signal Isolator

SCC311

• Universal input
• Dual ouput
• LED display

Flameproof Surface Mount Temperature Transmitter

TX3DR (Flameproof)

• 14~32 V DC loop supply
• Isolation : 1000 V AC RMS, 50 hz/1 minute
• 4~20 mA or 20~4 mA selection for output
• Linear mode & Square root mode option for linear input

Flameproof Memory Timer

RCT605 (Flameproof)

• Multifunction Memory Timer
• IP65
• Gas Groups I, IIA and IIB

Flameproof Rate Indicator

RCT206 (Flameproof)

• RPM/RATE Indicator with Alarms
• IP65
• Gas Groups I, IIA and IIB

Flameproof Programmable Indicator

TEC301 (Flameproof)

• Programmable Temperature Indicator
• IP65
• Gas Groups I, IIA and IIB

Flameproof ON-OFF Controller

TC96 (Flameproof)

• Programmable ONOFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof ON-OFF Controller

X48AV1 (Flameproof)

• Programmable ONOFF Controller
• IP65 rating
• Gas Groups I, IIA and IIB

Timers

RCT606

• Memory Timer
• 72x72
• 1 setpoints

Flameproof RH + T ON-OFF Controller

HX96A (Flameproof)

• RH+T ON-OFF Controller
• IP65
• Gas Groups I, IIA and IIB

Pt100 Handheld Thermometer

Accurad71

• Pt100 Input

Slot RTD Sensors

RNS202

• Inserted between winding
• Upto 180°C
• Fiber body

Transition Joint RTD Sensor - Standard Assembly

RTJ200 / RTJ201 / RTJ202 / RTJ206 / RTJ207/ RTJ208

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range

Flameproof RTD sensors - Mineral Insulated

RHF500 / RHF501 / RHF502 / RHF503 / RHF505 / RHF506 / RHF508 / RHF509

• Temperature measurement in hazardous environments
• Angular assemblies for complex installation
• 0 - 400 °C

Mineral Insulated RTD-Transition Joint

RTJ500 / RTJ506

• Rugged Transition Joints
• -50 to 400°C
• SS316L sheath material

Bayonet Thermocouple

TBC202 / TBC302 / TBC306 / TBC316

Instrumentation Control Panels

CP-INS

Universal Input Handheld Thermometer

Unirad

• Universal Input

TC K Handheld Thermometer

Digirad71

• TC K Input

Counter

RCT404

• Preset Counter
• 72x72
• 4-digit pushwheel switch

Counter

RCT403

• Preset Counter
• 72x72
• 6-digit pushwheel switch

Loop Powered Indicator

PLD40B

• Field mount
• Programmable

Loop Powered Indicator

PLD40A

• Panel mount
• Programmable

Signal Isolator

VISO

• AC/DC input
• Dual output

Flameproof RTD Sensors - Standard Assembly

RHF200 / RHF204 / RHF206 / RHF208 / RHF209

• For hazardous areas
• Certified for gas groups I, IIA and IIB (IIC optional)
• Impact and Vibration resistant

Signal Isolator

MSI7P

• Universal input
• 5 outputs
• Integral LCD

Rate Indicator

RCT206

• RPM/RATE Indicator with Alarms
• 48x96

Analog Input Module

SCM201

• 8 channels, each with universal input
• Isolated RS485/MODBUS RTU, up to 19200 Baud rate
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

Rate Indicator

RCT202

• Programmable RPM/RATE Indicators
• 48x96

Rate Indicator

RCT203

• RPM/RATE Indicator with Totaliser
• 48x96

Bearing Temperature RTD - Single Circuit / Dual Circuit

RBT200 / RBT201

• Sensitive, quick response tip
• -50 to 260 °C

Acid and Alkali Thermocouple - Teflon Coated Sheath

TAA310

• For corrosive environments
• J, K & T type
• Up to 200°C

DIN Rail Temperature Transmitter

TX1DR

• Pt100 or TC/mV

Head Mount Temperature Transmitter

TX1HM

• Pt100

Flameproof Temperature Transmitter

TX1HM (Flameproof)

• 2-wire Temperature Transmitter
• IP65
• Gas Groups I, IIA and IIB

Bimetallic Dial Thermometer (Temperature Gauge)

TGB200

• Bimetallic sensing element
• 2.5” / 4” / 6” dial sizes
• -50 °C to 400 °C

RTD with Thermowell

RT

• Thermowell upto 4000mm
• -50 to 250 °C/ -50 to 400 °C
• 3-wire Pt100 element in simplex or duplex assembly

3-Port Signal Isolator

SI3P

• Input: Voltage, Current, TC/RTD

Signal Isolator

MSI4P

• AC current/voltage input
• Dual output

Signal Isolator

MSI7PC

• Oxygen lambda sensor

Signal Isolator

MSI7PB

• Carbon potential transmitter

Head Mount Temperature Transmitter with HART Communication

SCC631

• Universal settings with HART protocol for various input signals
• 2-wire technology, 4~20 mA analog output
• High accuracy over total ambient temperature range
• Optical isolation

DIN Rail Temperature Transmitter

TX2DR (Pt100)

• Isolated
• Pt100

Signal Isolator

SCC402

• AC/DC Voltage
• AC/DC Current

Differential Pressure Transmitter

SCC503

• 2-wire

Differential Pressure Transmitter

SC502

• 2-wire

Multi-Channel Scanner

ISOSCAN

• 16 Channel Temperature Scanner
• Front panel user calibration
• Input burn protection

Head Mount Temperature Transmitter

SCC641

• User programmable with PC based utility software and USB configurator
• 2-wire technology, 4~20 mA analog output
• 2000V AC RMS galvanic isolation

Differential Pressure Transmitter

SC504

• 2-wire
• Dual Display