Surface Temperature RTD Sensors- Washer Type

RST202 / RST203

• Easy to install & replace
• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• -50 to 250°C range
• SS304 washer

GPS Slave Clock

GSC401 - FLP Slave

• Time format : 4 digit (HH:MM)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC401 - Ethernet Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - Ethernet (10/100 Base-TX, 8-pin RJ-45X1)
• Power supply : 85-265 VAC

GPS Slave Clock

GSC301 - FLP Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - Ethernet Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - Ethernet _10/100 Base-TX, 8-pin RJ-45X1)
• Power supply : 85-265 VAC

GPS Slave Clock

GSC401 - RS485 Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RS485
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RS485 Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RS485
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RF Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

Transition Joint RTD Sensors - Reduced Tip

RTJ220

• Platinum RTD in 2/3/4-wire configuration with single/dual elements in Class B/Class A
• -50 to 250°C range
• Integral cable makes the assembly lighter and easy to install
• Reduced tip design for faster response

Hawkeye - RH+T+DP Indicator

HAWKEYE

• Micro-controller based
• RH+T+DP Indicator
• 3 User programmable channels measurement
• Slave display unit - RH+T+DP remote

BATTERY OPERATED HUMIDITY INDICATOR

RHT803

• Battery operated
• Accuracy : ± 2% RH, ± 0.5 °C
• IP65, rugged construction

BATTERY OPERATED HUMIDITY INDICATOR

RHT802

• FLP
• IP65

PROGRAMMABLE SIGNAL ISOLATOR

SCC313

• Universal Input
• Dual Output
• Fast Response

Stick On Surface Temperature Thermocouple

TST500 & RST500

• Self Adhesive Tape
• Quick Response
• (-50) °C to +180 °C

Surface Temperature Thermocouple - Washer

TST300

• J/K/T
• Up to 300 °C

Analog Input Modules with Channel-to-channel Isolation

SCM211

• 4 channels, each with isolated universal input
• Isolated RS485/ MODBUS RTU, upto 57600 BAUD RATE
• Channel-to-channel isolation of 300 V AC
• Cost-effective Remote I/O For PLCs
• Powerful, flexible SCADA software
• Tmax version with 4~20 mA

3-Port Signal Isolator

SI3P

• Input: Voltage, Current, TC/RTD

RTD with Lemo Connector

RCL607 / RCL617

• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• Other calibrations & higher accuracies on request
• -50 to 250°C range
• 0.5” / 1” / 1.5” / 2 “ Triclover connections

Plastic Bayonet RTD Sensors - Fixed Length

RPB Series

• Supplied with 1 meter cable or in multiples thereof
• Bayonet caps & made of nickel plated brass
• Spring length (SL) : 40mm compressed to 15 - 20mm
• Bayonet cap having 12mm inner diameter

Acid and Alkali RTD - With Teflon Protective Sleeve

RAA Series (RAA530/RAA532/RAA536)

• SS316L Teflon protective sleeve
• 3-wire Pt100 element in simplex or duplex assembly
• 0 to 200°C range

Acid and Alkali RTD - Anti-Corrosive Sheath

RAA900 / RAA902 / RAA920

• 3-wire Pt100
• 0 to 200°C
• Titanium sheath

Acid and Alkali RTD - With Teflon Coating

RAA310 / RAA312 / RAA320

• Titanium sheath with Teflon coating
• 3-wire Pt100 element in simplex or duplex assembly
• 0 to 200°C range

General Purpose Bourdon Pressure Gauge (Liquid filled)

Series 110.000

• 0 to 1000 Kg/cm²
• Non-corrosive Gases and Liquid Media
• Copper alloy wetted parts
• 50,63 100 and 150mm dial size

Autoclave Validation RTD

RAC243

• For Autoclave Validation
• 0 to 150°C
• 3-wire Pt100 element

Low Pressure Diaphragm Gauge

PGD500 / PGD506

• Low pressure upto 1000mbar
• SS 316L diaphragm
• Economy version

Economy Sealed Gauge - With Cup Type Tension flange

400.000 (Old model no - PGS200 / PGS201 / PGS210 / PGS211)

• 0 to 16 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For non corrosive gases and liquids
• Diaphragm: SS316L with Teflon protection

Flanged Sealed Gauge with I-Section Sealed Unit

PGS600 / PGS601 / PGS610 / PGS611

• 0-210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316L Teflon protected
• I section type bolted construction

Flanged Sealed Gauge with Bolted Sealed Unit

PGS500 / PGS501 / PGS510 / PGS511

• 0-70 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• Diaphragm material, SS316L Teflon protected
• Flush type bolted construction
• For corrosive gases, liquid, viscous media

Transition Joint RTD Sensor - Standard Assembly

RTJ200 / RTJ201 / RTJ202 / RTJ206 / RTJ207/ RTJ208

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range

HART® Communication Protocol Software

Model DevCom2000

Magnehelic® Differential Pressure Indicating Transmitter

Series 605

Magnesense® Differential Pressure Transmitter

Series AT2MS

Autoclave Validation Thermocouples

TAC243

• For Autoclave Validation, not continuous use
• 0 to 150°C range

Stick On Thermocouple

TS

• Self Adhesive Tape
• Less than 0.2 sec response
• -30 °C to +180 °C

Quick Disconnect Thermocouples

TQ

• Mineral Insulated
• Lightweight
• Quick response time

Low Cost Thermocouple

TL200

• Low cost varieties
• Class 2 (IEC) grade thermocouple wires
• Up to 300°C

Slot RTD Sensors

RNS202

• Inserted between winding
• Upto 180°C
• Fiber body

Economy Pressure Gauge with Welded Sealed Unit

PGS400 / PGS401 / PGS410 / PGS411

• 0-400 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316 Diaphragm
• For non corrosive gases and Liquids
• Economic model

4 ½ DIGIT PROCESS INDICATOR WITH ALARMS

TEC401

Pressure Transmitter

PTX201

• All stainless steel construction
• Excellent load cycle stability and shock resistance
• 4~20 mA, 2-wire output
• Ranges upto 400 barg

Electrical Contact Gauge

EOC200

• Adjustable, snap action contact
• Standard 1NC+1NO switching function

Electrical Contact Gauge

EOC500

• Adjustable, snap action contact
• Standard 1NC+1NO switching function

Diaphragm Seal, Flange Mounted Pressure Gauge

CSF06

• Flush type bolted construction, standard model
• Flanged process connection for direct mounting
• Weatherproof to IP68 per IS/IEC 60529:2001

Diaphragm Seal with I Section

CSE08

• I-section type bolted construction
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Welded Low Pressure Diaphragm Gauge

LPA12 Series

• Low pressure economy version
• Element made of SS316 diaphragm

Multi-Channel Scanner

ISOSCAN-V

• 16 Channel Temperature Scanner
• Non-volatile memory for parameters - no batteries
• 3 key, 5 level programming
• Setpoint and level locks

Multi-Channel Scanner

ISOSCAN-H

• 16 Channel Temperature Scanner
• RS485 with MODBUS RTU
• Powerful, flexible SCADA software available

GPS Master-Slave Clock

GMC203 (Master)

• Time format : 6 digit (HH:MM:SS)
• Time source : GPS, NTP
• Isolation power supply and RS485 : 2000VAC, RMS, 1 minute

Adjustable Length Plastic Bayonet RTD Sensors- Tip Length 150 mm

RPB226

• Bayonet caps having 15mm ID
• Supplied with 3 mtr. long PTFE insulated, SS braided cable
• Other cable lengths available in multiples of 1 mtr

HYPODERMIC RTD For Autoclave

RAC900/901

• Chizle shaped tip for easy penetration Designed for Laboratory, Food processing use and similar fields Small size provides fast response time

Vaccum Type Pressure Gauge

VBE200

• Bourdon tube type vacuum gauge
• All internal and external SS construction
• Excellent load cycle stability and shock resistance

Diaphragm Seal With Welded Flange

CSF16

• Flush type welded construction, standard model
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Differential Pressure Gauge

DPG

• Monitoring of filter contamination
• Level measurement in closed vessels

Gas Filled Dial Thermometer

G (Rigid Stem) G-AC(Extension Capillary)

• Fast response
• Suitable for sanitary application
• All SS construction
• Rigid stem or Capillary type

DIAPHRAGM SEAL, CAPSULE TYPE WITH THREADED CONNECTION

CSA05

• High pressure welded construction, economic model
• Threaded process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Diaphragm Seal With Flush Flange

CSF10 Series

• Flush type welded construction, standard model
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Pressure Transmitter

PTD251

• Termination : Aluminum head with threaded cap and chain with single compression cable gland
• Excellent load cycle stability and shock resistance
• 4-20mA, 2-wire output signal

Diaphragm Seal With Thread Connection

CSA03 Series

• High pressure bolted construction, standard model
• Threaded process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Diaphragm Seal With Threaded Connection

CSA02

• Low pressure bolted construction, economy model
• Threaded process connection for direct mounting

Low Pressure Diaphragm

LPA01

• Low pressure economy version
• Element made of SS316 diaphragm

8 Channel Scanner

UMX201

• 8 universal analog inputs
• Maximum 4 or 8 relay outputs
• 85~265 VAC or 18~35 V DC supply

GPS Slave Clock

GSC401 - RF Flush Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RF Flush Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

SIGNAL ISOLATOR, DUAL OUTPUT

SI4P

• 0/4~20 mA input
• Line fault detection

RS485 ISOLATED REPEATER

DCC302

• 1800V optically isolated data lines
• -40 to 80°C operating temperature
• Modbus ASCII/RTU

USB TO HART CONVERTER - ISOLATED

DCC503

• Complete HART device interface
• Complies with HART physical layer
• Provide 2 KV isolation between PC and HART instrument that eliminate grounding effect

RS232 TO RS485/RS422 CONVERTER

DCC301

• Transmission rate : 300 - 115200bps
• Transmission distance : RS485 1200m, RS232 5m
• Working mode : asynchronous, half duplex, differential transmission
• Supports 32 nodes on RS485 bus
• 3-port isolation between Power Supply, RS232, RS485 & RS422

SERIAL TO ETHERNET CONVERTER WITH DUAL MASTERS

DCC211

AC/DC CURRENT/VOLTAGE TRANSDUCER

SCC314

• AC/DC Input
• Dual Output
• RS485

USB TO SERIAL CONVERTER - ISOLATED

DCC501

• Compatible with USB 2.0
• 12Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission
• LEDs for indicating USB and TxD/RxD activity
• 2 kV isolation between PC and the instrument being programmed
• Din rail and surface mount

SERIAL TO ETHERNET CONVERTER WITH PoE

DCC202

• 10/100 Mbps Ethernet port
• Browser based configuration utility
• Telnet, TCP Modbus protocols
• Serial interface : RS232, RS485, RS422

ANALOG INPUT MODULE WITH ETHERNET PORT

SCM203

• 8 universal analog inputs
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

RH+TEMPERATURE TRANSDUCER

RHT811 - With Display

• 2x Analog outputs or 1xAnalog+Pt100/Pt1000 RTD output
• 18~30 V AC/DC supply
• Dual 7-segment LCD display to show RH & T

RTD WITH TEFLON INSULATED OUTER SLEEVE

RAA43 series

• SS316L sheath with TEFLON protective sleeve
• Up to 200°C
• Non-bendable sheath

GPS Slave Clock

GSC401 - RF Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

GPS Master Clocks

GMC201 (Master)

• Power supply : 85~265 VAC / 50Hz
• Communication interface : RF wireless, RS485 (MODBUS RTU)
• Protocol : Proprietary
• Parameter configuration : PC based utility

BAYONET THERMOCOUPLE ASSEMBLIES, ADJUSTABLE LENGTH

TPB216

• Supplied with ungrounded (isolated) hot junction
• Grounded hot junction optional
• Bayonet cap made of plated brass

BAYONET RTD ASSEMBLIES - ADJUSTABLE LENGTH

RPB216

• Bayonet cap made of plated brass
• Standard sheath material : SS304
• Single element as standard
• Class A accuracy

TRANSITION JOINT ASSEMBLIES

RTJ20 SERIES

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) Sheath material

HYGIENIC SENSOR FOR PIPE LINE

RTP502

• Maximum temperature : Probe : 200°C, Cable : 200°C
• Accuracy : Pt-100 element, IEC 60751 Class A
• Process connection : G 1/8” for mounting to weld-in boss or thermowell

RTD FOR CONTINUES USE IN AUTOCLAVE

RAC232 / RAC242

• 4-wire Pt100 element in simplex or duplex assembly
• 0 to 150°C range
• Teflon insulated cable in 5 / 10 meters

RTDS FOR AUTOCLAVE

RAC241

• 4-wire Pt100 element in simplex or duplex assembly
• 0 to 150°C range
• Teflon insulated Cable in 5 meters and 10 meters

RTD for Continuous use in Autoclave

RAC240

RTD for Continues use in Autoclave

RAC251

• Pt-100, 4-wire
• Simplex (One) / Duplex (Two) circuits
• Range 0 to 150°C
• Sheath material - SS316L (1.4404)

Head Mount Temperature Transmitter

TX1HM

• Pt100

RH+T Transmitter

SC804

• Surface Mount
• FLP
• Dual Display

RH+T Transmitter

SC807

• Surface / Wall / Duct Mount

RH+T Transmitter

SC805

• Surface / Wall / Duct Mount
• LCD Display

Blind Temperature Controller

C961

• J, K, Pt100
• 1 Setpoint
• 96x96

Blind Temperature Controller

ELEKTRA II

• J, K, Pt100
• 1 Setpoint
• 72x72

Digital Temperature Controller

PRIMA 720

• J, K Pt100
• 72x72

Digital Temperature Controller

PRIMA 480

• J, K, Pt100
• 48x48

Digital Temperature Controller

EK1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 481

• J, K, Pt100, mA, mV
• 1 Setpoint
• 48x48

RH+T Transmitter

SC806 (Flameproof - Wall Mount)

• Wall Mount
• FLP

Loop Powered Isolator

LPI61

• Loop Drop 5V
• Load 0 - 600 Ohms without load trimming

Loop Powered Isolator

LPI51

• Loop Drop 3.7V
• Load 25 - 375 Ohms

Multi-Channel Scanner

ISOSCAN

• 16 Channel Temperature Scanner
• Front panel user calibration
• Input burn protection

Differential Pressure Transmitter

SCC503

• 2-wire

Differential Pressure Transmitter

SC502

• 2-wire

Differential Pressure Transmitter

SC504

• 2-wire
• Dual Display

Digital Temperature Controller

PRIMA 1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK4SP

• J, K, Pt100, mA, mV
• 4 Setpoints
• 96x96

Digital Temperature Controller

EK2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK491

• J, K, Pt100 mA, mV
• 1 Setpoint
• 48x96

Head Mount Temperature Transmitter with HART Communication

SCC631

• Universal settings with HART protocol for various input signals
• 2-wire technology, 4~20 mA analog output
• High accuracy over total ambient temperature range
• Optical isolation

High Pressure Sealed gauge

PGS300 / PGS301 / PGS310 / PGS311

• 0…210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For corrosive gases, liquids and viscous media

Flameproof Controller

TC48V3 (Flameproof)

• Programmable Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Programmable Indicator

TEC301 (Flameproof)

• Programmable Temperature Indicator
• IP65
• Gas Groups I, IIA and IIB

Flameproof ON-OFF Controller

X48AV1 (Flameproof)

• Programmable ONOFF Controller
• IP65 rating
• Gas Groups I, IIA and IIB

Timers

RCT703

• Non-memory Timer
• 72x72
• 1 setpoint

Timers

RCT606

• Memory Timer
• 72x72
• 1 setpoints

Flameproof Rate Indicator

RCT206 (Flameproof)

• RPM/RATE Indicator with Alarms
• IP65
• Gas Groups I, IIA and IIB

Flameproof Counter

RCT301 (Flameproof)

• Preset Counter with Rate Indicator
• IP65
• Gas Groups I, IIA and IIB

Industrial Bourdon Type Pressure Gauge

PBE200

• Suitable for corrosive environments and gaseous or liquid media
• Excellent load cycle stability and shock resistance
• Utility, pipe line, air & water application

Universal Input Handheld Thermometer

Unirad

• Universal Input

TC K Handheld Thermometer

Digirad71

• TC K Input

Pt100 Handheld Thermometer

Accurad71

• Pt100 Input

Flameproof Loop-Powered Indicator

PLD40 (Flameproof)

• Loop Powered Indicator
• IP66
• Gas Groups I, IIA, IIB and IIC

Flameproof RH + T ON-OFF Controller

HX96A (Flameproof)

• RH+T ON-OFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Memory Timer

RCT605 (Flameproof)

• Multifunction Memory Timer
• IP65
• Gas Groups I, IIA and IIB

Timers

RCT601

• Memory Timer
• 48x48
• 2 setpoints

Timers

RCT604

• Memory Timer
• 72x72
• 2 setpoints

Signal Isolator

MSI4P

• AC current/voltage input
• Dual output

Signal Isolator

SCC402

• AC/DC Voltage
• AC/DC Current

Signal Isolator

SCC311

• Universal input
• Dual ouput
• LED display

Signal Isolator

SCC401

• Voltage, Current, TC/RTD, Ohms, etc

Flameproof Pipe Mount Temperature Transmitter

TX3DRB

• 14~32 V DC loop supply
• Isolation : 1000 V AC RMS, 50 hz/1 minute
• 4~20 mA or 20~4 mA selection for output
• Linear mode & Square root mode option for linear input

DIN Rail Temperature Transmitter

TX2DR (TC/mV)

• Isolated
• TC/mV

DIN Rail Temperature Transmitter

TX2DR (Pt100)

• Isolated
• Pt100

Signal Isolator

MSI7P

• Universal input
• 5 outputs
• Integral LCD

Signal Isolator

MSI7PB

• Carbon potential transmitter

Counter

RCT404

• Preset Counter
• 72x72
• 4-digit pushwheel switch

Counter

RCT403

• Preset Counter
• 72x72
• 6-digit pushwheel switch

Counter

RCT301

• Preset Counter with RPM/RATE Indicator
• 72x72

Rate Indicator

RCT203

• RPM/RATE Indicator with Totaliser
• 48x96

Rate Indicator

RCT206

• RPM/RATE Indicator with Alarms
• 48x96

Analog Input Module

SCM201

• 8 channels, each with universal input
• Isolated RS485/MODBUS RTU, up to 19200 Baud rate
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

Loop Powered Indicator

PLD40B

• Field mount
• Programmable

Loop Powered Indicator

PLD40A

• Panel mount
• Programmable

Loop Powered Indicator

PLC40

• Range Selection
• IP65 Protection
• 4~20 mA Current Input

Signal Isolator

MSI7PC

• Oxygen lambda sensor

DIN Rail Temperature Transmitter

TX1DR

• Pt100 or TC/mV