4 ½ DIGIT PROCESS INDICATOR WITH ALARMS

TEC401

Flow Rate Indicator-Totalizers

FLT401

• Inputs : 0 / 4~20 mA, 0~5, 1~5, 0~10 volts
• Square-root option
• 4-digit Rate Indicator, 6-digit Totalizer(Totaliser)
• Four setpoints each assignable to either flow rate or totalizer(Totaliser)
• Programmable flow rate, setpoints and relay modes, etc.

Flow Rate Indicator-Totalizers

FLT601

• Inputs : 0/4~20 mA, 0~5, 1~5, 0~10 volts
• Square-root option
• 6-digit Rate Indicator, 8-digit Totalizer(Totaliser)
• Four setpoints each assignable to either flow rate or totalizer(Totaliser)
• Programmable flow rate, setpoints and relay modes, etc.

Laser Welded Flush Flanged Chemical Seal Unit

CSU900

• For High Pressure Applications
• SS316L / Hastalloy / Tantallum Diaphragm
• Up to 6000 psi / 420 kg/cm²

Flushed Flange Chemical Seal Unit

CSU500

• High Pressure Applications
• All stainless steel design
• Up to 1000 psi / 70 kg/cm²

Welded Chemical Seal Unit

CSU400

• For High Pressure Applications
• All-SS Welded Construction
• Up to 6000 psi / 420 kg/cm²

SS304 Tension Flange Chemical Seal Units

CSU300

• For High Pressure Applications
• Bolted Construction
• Up to 3000 psi / 210 kg/cm²

Cup Tension Flange Chemical Seal Unit

CSU200

• For low pressure applications
• Bolted construction
• Up to 150 psi / 10 kg/cm²

Dial Thermometer - Gas Filled (Temperature Gauge)

TGN200

SIDE MOUNTING LEVEL SWITCH PIVOTED TYPE

SPS201

• Application Process Fluid (Options - Water, Diesel, Hydraulic Oil, Furnace Oil, Lube Oil, Petro-Chemical, Acids HCL & H2S04, Milk, Dye Chemical, Hot water,Propane, methanol, alcohol etc).
• Process Connection: threaded BSP, NPT / flanged / triclover

3-Port Signal Isolator

SI3P

• Voltage, Current, TC/RTD, ohms etc

Analog Input Modules with Channel-to-channel Isolation

SCM211

• 4 channels, each with isolated universal input
• Isolated RS485/ MODBUS RTU, upto 57600 BAUD RATE
• Channel-to-channel isolation of 300 V AC
• Cost-effective Remote I/O For PLCs
• Powerful, flexible SCADA software
• Tmax version with 4~20 mA

Ultrasonic Level Transmitters

ULT202 / ULT211 / ULT212

• ULT202, ULT212 : 0.4m ~ 10m for liquids
• ULT212 : 4~20mA or 4~20mA/HART
• Process connection : M66×2 or flange

Displacer level switch

DLS201

• Suitable for narrow and wide level ranges
• Range : Upto 15 mtrs
• Adjustable setpoints
• Suitable for viscous and slurry type liquids

FLOAT & BOARD LEVEL GAUGE

FBG201

• Simple
• Easy mounting
• Low maintenance
• Economical measurement solution

Tubular level gauge

TBG201

• Rugged construction
• Easy mounting
• Low maintenance
• Direct visible level indication
• Economical measurement solution

Process Automation

For a process in Phosphorus Pentasulphide Plant

• PLC based Pump and Valve Control
• Alarm annunciator for critical alarms

Magnetic Level Gauge

MLG201

• Rugged construction
• Easy mounting with flanged connection
• Low maintenance
• Continuous level monitoring (with use of transmitter 4-20mA output)
• Safe for high temperature, high pressure applications
• Safe for corrosive,toxic,flammable liquids

Reflex Level Gauge

RLG201

• For Visual Indication
• Flanged, Threaded Unions, Butt Weld Ends Connection

Cable Float Switches (Tilt Level Switches)

CFS201

• Low cost polypropylene level switch
• Hermetically sealed/moulded
• Microswitch operated

Float Guided Level Switches

FGS201 / FGS202 / FGS203 / FGS204 / FGS205 / FGS206 / FGS207

• Rugged construction
• Easy mounting with flanged or threaded connection
• Multilevel monitoring upto 4 levels
• Weatherproof
• Exproof

Submersible Level Transmitters

SLT201

• 2 wire, 4 to 20 mA output
• Fully sealed IP68 sensor for permanent submersion
• Special polyurethane cable ensures more flexibility and durability.
• SS316 Construction

Radar Level Transmitters - Contact Type

RLT201

• Contact type measurement
• Measuring range up to 30 meter
• Exproof

Acid and Alkali RTD - With Protection Tube

RAA200

• For low-concentration acids and alkalis
• Up to 250°C

Flameproof RTD Sensors - Standard Assembly

RHF200 / RHF204 / RHF206 / RHF208 / RHF209

• For hazardous areas
• Certified for gas groups I, IIA and IIB (IIC optional)
• Impact and Vibration resistant

Flameproof RTD sensors - Mineral Insulated

RHF500 / RHF501 / RHF502 / RHF503 / RHF505 / RHF506 / RHF508 / RHF509

• Temperature measurement in hazardous environments
• Angular assemblies for complex installation
• 0 - 400 °C

Pipe Line RTD - Tri Clover Connection With Clamp-In TEE

RPL601

• 0.5”/1”/1.5 /2” Tri clover connections
• -50 to 250°C
• For pharmaceutical industries

RTD sensor For Dry Heat Sterilizer (DHS)

RDH245

• For high pressures and temperatures
• -50 to 250°C
• 3-wire Pt100 element in simplex or duplex assembly

Mineral Insulated RTD-Transition Joint

RTJ500 / RTJ506

• Rugged Transition Joints
• -50 to 400°C
• SS316L sheath material

Standard Mineral Insulated RTD Assembly with Terminal Head

RHW50 Series

• Bendable sheath
• -50 to 400°C range
• SS316L sheath material

Quick Disconnect RTD - Tri-Clamp M12 Connector

RCM607 / RCM617

• 1” / 1.5”/ 2” Triclover connection
• -50 to 250°C range
• 3-wire Pt100 element in simplex or duplex assembly

RTD with M12 Connector - COMPACT RTD SENSORS WITH TRANSMITTER

RCM212

• Integrated 4-20 mA transmitter
• -50 to 150°C range
• M12 connector with IP69K for electrical connections
• Operating pressure : 10 bar maximum

Slot RTD Sensors

RNS202

• Inserted between winding
• Upto 180°C
• Fiber body

HART® Communication Protocol Software

Model DevCom2000

Magnehelic® Differential Pressure Indicating Transmitter

Series 605

Electrical contact Temperature Gauge

G Series

• Max. 250 V, 1 Amp rated power
• Magnetic snap action contact
• 100 and 150 mm dial sizes

Acid and Alkali Thermocouple - Teflon Protective Sleeve

TAA530

• For Corrosive Environments
• Up to 200°C

Bimetallic Dial Thermometer (Temperature Gauge)

TGB200

• Bimetallic sensing element
• 2.5” / 4” / 6” dial sizes
• -50 °C to 400 °C

Thermocouple for Deep freezer and Lyophilzation

TFL248 now as RFL258

• Teflon coating
• -100 to 200°C
• SS316L sheath

Mineral Insulated Thermocouple

TCMI

• Compact inorganic insulation (MgO)
• Range of dia
• Fast response

Low Cost Thermocouple

TL200

• Low cost varieties
• Class 2 (IEC) grade thermocouple wires
• Up to 300°C

Acid and Alkali Thermocouple - Teflon Coated Sheath

TAA310

• For corrosive environments
• J, K & T type
• Up to 200°C

Acid and Alkali RTD - With Teflon Protective Sleeve

RAA Series (RAA530/RAA532/RAA536)

• SS316L Teflon protective sleeve
• 3-wire Pt100 element in simplex or duplex assembly
• 0 to 200°C range

ANALOG INPUT MODULE WITH ETHERNET PORT

SCM203

• 8 universal analog inputs
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

8 Channel Scanner

UMX201

• 8 universal analog inputs
• 8 thermocouples, Pt50, Pt100, Pt1000, Cu53, 0~100 mV, 0~5 V, 0~10 V, 1~5 V, 0/4~20 mA
• Isolated RS485/MODBUS RTU, Upto 57600 Baud
• 85~265 VAC or 20~50 V DC supply

RTD WITH TERMINAL HEAD

RHW202

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

RTD WITH FLAMEPROOF TERMINAL HEAD

RHX20 Series

• RTD’s are terminated into Flameproof head suitable for using in hazardous area
• Standard Flameproof heads are certified for using in gas group IIB

Accessories for Standard RTD Assembly with Terminal Head

RHW ACCESSORIES

Standard RTD Assembly with Terminal Head

RHW201

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

Standard RTD Assembly with Terminal Head

RHW200

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

Standard RTD Assembly with Terminal Head

RHW20 Series

• -50 to 250°C range
• Standard Lengths are 100, 150, 200 & 300mm longer assemblies not recommended

RTD for Lyophilizer and Deep Freezer

RFL258

• Teflon coating
• -100 to 200°C
• SS316L sheath

RTD with M12 Connector - COMPACT RTD SENSORS

RCM

• Pt-100, 4-wire
• -50...+200°C measuring range
• M12 connector with IP69K for electrical connection
• G½”, G¼”, ¼”NPT & ½”NPT adjustable fittings, SS316L

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCM216

• Integrated 4-20 mA transmitter
• Ranges from -50...+200°C
• Supply : 8...35VDC
• G1?2”, G1?4”, 1?4”NPT & 1?2”NPT adjustable fittings, SS316L
• M12 connector with IP69K for electrical connections

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP812

• Integrated 4-20 mA transmitter
• Ranges from 0...200°C with cooling neck
• Extremely Short response times

RTD WITH TERMINAL HEAD

RHW204

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring rangq
• SS316L (1.4404) sheath

RTD WITH TERMINAL HEAD

RHW206

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

RTD WITH TERMINAL HEAD

RHW208

• Pt-100, 3-wire
• Class A / Class AA / Higher
• -50 to 250°C measuring range
• SS316L (1.4404) sheath

RTD WITH M12 CONNECTORS

RCM206

• Pt-100, 4-wire
• Class A accuracy as standard
• -50...+200°C measuring range

RTD WITH TERMINAL HEAD

RHW207

• Non-bendable sheath
• -50 to 250°C range
• Standard lengths are 100, 150 & 300mm. Longer assemblies not recommended

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX506

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX505

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX504

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX503

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX502

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

MINERAL INSULATED RTD WITH FLAMEPROOF TERMINAL HEAD

RHX500

• Bendable sheath
• -50 to 400°C range
• Lengths upto 40 meters
• Termination : Flameproof aluminium head for gas group IIB

FLAMEPROOF SANITARY RTD

RXS610

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Wetted parts made of SS316L (1.4404)
• Flameproof dia cast aluminum terminal head (IP68)

Flameproof Sanitary RTD

RXS600

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Wetted parts made of SS316L (1.4404)

COMPACT RTD SENSORS With M12 Connector

RCP802

• Pt100, 4 wire
• -50...+200°C measuring range with cooling neck
• Extremely short response times

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP712

• Integrated 4-20 mA transmitter
• Ranges from -50...200°C with cooling fins
• For pipe lines from 15NB onwards
• Extremely Short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCP702

• Pt100, 4 wire
• Class A accuracy as standard, Class AA optional
• -50...+200°C measuring range with cooling fins
• Extremely short response times

Head Mount Temperature Transmitter

SCC643

• RTD Input
• Non-Isolated
• Programmable

Float Guided Level Switches

FG202

Pressure gauge with Sealed unit & Extension Capillary

PGS700 - Extended capillary

• Available in models PGS500, PGS900, PGS200, PGS600 & PGP200
• SS capillary with or without SS armour
• Protection : IP68

SIGNAL ISOLATOR, DUAL OUTPUT

SI4P

• 0/4~20 mA input
• Line fault detection

USB TO HART CONVERTER - ISOLATED

DCC503

• Complete HART device interface
• Complies with HART physical layer
• Provide 2 KV isolation between PC and HART instrument that eliminate grounding effect

RS232 TO RS485/RS422 CONVERTER

DCC301

SERIAL TO ETHERNET CONVERTER WITH DUAL MASTERS

DCC211

AC/DC CURRENT/VOLTAGE TRANSDUCER

SCC314

• AC/DC Input
• Dual Output
• RS485

RTD with M12 Connector - COMPACT RTD SENSORS WITH TRANSMITTER

RCM213

• Integrated 4-20 mA transmitter
• Ranges from -50...+150°C
• Supply : 8...35VDC
• Accuracy : < ±0.1% of measurement range *

RTD with M12 Connector - COMPACT RTD SENSORS

RCM202

• Pt-100, 4-wire
• -50...+200°C measuring range
• M12 connector with IP69K for electrical connection
• G1/4”, G1/2”, 1/4”NPT & 1/2”NPT threads, SS316

RTD WITH TEFLON INSULATED OUTER SLEEVE

RAA43 series

• SS316L sheath with TEFLON protective sleeve
• Up to 200°C
• Non-bendable sheath

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP612

• Integrated 4-20 mA transmitter
• Ranges from -50...+150°C
• For pipe lines from 15NB onwards
• Extremely Short response times

COMPACT RTD SENSORS With M12 Connector

RCP602

• Pt100, 4 wire
• -50...+150°C measuring range
• Extremely short response times

COMPACT RTD SENSORS WITH TRANSMITTER

RCP412

• Integrated 4-20mA transmitter
• Ranges from -50...200°C with cooling neck
• Supply : 8...35 VDC
• For pipe lines from 15NB onwards
• Extremely Short response times

Compact Sensors For Pipeline - COMPACT RTD SENSORS WITH TRANSMITTER

RCP312

• Integrated 4-20mA transmitter
• Ranges from -50...200°C with cooling fins
• For pipe lines from 15NB onwards
• Extremely Short response times

RTD Sensors for Pipeline - COMPACT RTD SENSORS

RCP302H

• Pt-100, 4-wire
• -50...+200°C measuring range with cooling fins
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum

RTD with M12 Connector - COMPACT RTD SENSORS

RCP302

• Pt-100, 4-wire
• -50...+200°C measuring range with cooling fins
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum

RTD with M12 Connector - COMPACT RTD SENSORS

RCP202

• Pt100, 4 wire
• -50...+150°C measuring range
• For pipelines from 15NB onwards
• Operating pressure : 50 bar maximum
• Extremely short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCP512

• Integrated 4-20 mA transmitter
• Ranges from -50...+160°C
• Highly accurate even with short insertion lengths
• Extremely short response times

Acid and Alkali Thermocouple - WITH TEFLON INSULATED OUTER SLEEVE

TAA Series

• SS316 sheath with TEFLON protective sleeve
• Polypropylene head
• Bendable sheath

RTD with M12 Connector - COMPACT RTD SENSORS

RCM200

• Pt-100, 4-wire
• -50...+200°C measuring range
• M12 connector with IP69K for electrical connection

USB TO SERIAL CONVERTER - ISOLATED

DCC501

• Compatible with USB 2.0
• 12Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission

Instrumentation Control Panels

CP-INS

DIN Rail Temperature Transmitter

TX1DR

• Pt100 or TC/mV

RH+T Transmitter

SC806 (Flameproof - Wall Mount)

• Wall Mount
• FLP

RH+T Transmitter

SC804

• Surface Mount
• FLP
• Dual Display

RH+T Transmitter

SC807

• Surface / Wall / Duct Mount

RH+T Transmitter

SC805

• Surface / Wall / Duct Mount
• LCD Display

Blind Temperature Controller

ELEKTRA II

• J, K, Pt100
• 1 Setpoint
• 72x72

Digital Temperature Indicator

EK490

• J, K, Pt100
• 48x96

Digital Temperature Indicator

PRIMA 0SP

• J, K Pt100
• 96x96

Digital Temperature Controller

PRIMA 480

• J, K, Pt100
• 48x48

Digital Temperature Controller

EK1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

RH+T Indicator

HT20

• RH+T Indicator
• Field/Wall mount

RH+T ON-OFF Controller

HTC96

• RH+T Controller
• 2 setpoints

RH+T ON-OFF Controller

HX96A

• RH+T Controller
• 4 setpoints
• RS485

Head Mount Temperature Transmitter with HART Communication

SCC631

• Universal settings with HART protocol for various input signals
• 2-wire technology, 4~20 mA analog output
• High accuracy over total ambient temperature range
• Optical isolation

Head Mount Temperature Transmitter-

SCC642

• RTD Input
• Non-Isolated
• Programmable

Head Mount Temperature Transmitter

SCC641

• User programmable with PC based utility software and USB configurator
• 2-wire technology, 4~20 mA analog output
• 2000V AC RMS galvanic isolation

Head Mount Temperature Transmitter

TX1HM

• Pt100

Loop Powered Isolator

LPI61

• Loop Drop 5V
• Load 0 - 600 Ohms without load trimming

Loop Powered Isolator

LPI51

• Loop Drop 3.7V
• Load 25 - 375 Ohms

Scanner

ISOTHERM

• 8 Channel Temperature Scanner

Scanner

ISOSCAN

• 16 Channel Temperature Scanner

Differential Pressure Transmitter

SCC503

• 2-wire

RH+T Wet and Dry Bulb Controller

RHC201

• Wet and Dry Bulb %RH Controller

Digital Temperature Controller

PRIMA 2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK4SP

• J, K, Pt100, mA, mV
• 4 Setpoints
• 96x96

Digital Temperature Controller

EK2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

ON-OFF Controller

X49A

• Universal input
• 3 Setpoints
• 48x96

ON-OFF Controller

X72A

• Universal input
• 4 Setpoints
• 72x72

ON-OFF Controller

X96A

• 2 x universal input
• 4 Setpoints
• 96x96
• Dual Display indicator

ON-OFF Controller

X48A

• Universal input
• 3 Setpoints
• 48x48

PID Controller

X96

• Universal Input
• 5 Setpoints
• 96x96

PID Controller

X96P

• 2 x Universal Inputs
• 5 Setpoints
• 96x96

Programmable Controller

TEC201

• Universal Input
• 2 Setpoints
• 48x96

Programmable Controller

TCP962

• Universal input
• 2 Setpoints
• 96x96

Programmable Controller

TC49SU

• Universal input
• 2 Setpoints
• 48x96

Programmable Controller

EC48S

• J, K, Pt100
• 1 Setpoint
• 48x48

Programmable Controller

TC96

• Universal input
• 2 Setpoints
• 96x96

Programmable Controller

TC72

• Universal input
• 2 Setpoints
• 72x72

Programmable Controller

TCP961

• Universal input
• 1 Setpoint
• 96x96

Miniature Chemical Seal Unit

CSU800

• Miniature seal units for pressure transmitters
• Up to 200 psi / 14 kg/cm²

Acid and Alkali RTD - Anti-Corrosive Sheath

RAA900 / RAA902 / RAA920

• 3-wire Pt100
• 0 to 200°C
• Titanium sheath

Universal Input Handheld Thermometer

Unirad

• Universal Input

TC K Handheld Thermometer

Digirad71

• TC K Input

Pt100 Handheld Thermometer

Accurad71

• Pt100 Input

Flameproof Loop-Powered Indicator

PLD40 (Flameproof)

• Loop Powered Indicator
• IP66
• Gas Groups I, IIA, IIB and IIC

Flameproof RH + T ON-OFF Controller

HX96A (Flameproof)

• RH+T ON-OFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Temperature Transmitter

TX1HM (Flameproof)

• 2-wire Temperature Transmitter
• IP65
• Gas Groups I, IIA and IIB

Flameproof Surface Mount Temperature Transmitter

TX3DR (Flameproof)

• 14~32 V DC loop supply
• Isolation : 1000 V AC RMS, 50 hz/1 minute
• 4~20 mA or 20~4 mA selection for output
• Linear mode & Square root mode option for linear input

Flameproof Memory Timer

RCT605 (Flameproof)

• Multifunction Memory Timer
• IP65
• Gas Groups I, IIA and IIB

Flameproof Rate Indicator

RCT206 (Flameproof)

• RPM/RATE Indicator with Alarms
• IP65
• Gas Groups I, IIA and IIB

Flameproof Rate Indicator

RCT202 (Flameproof)

• Programmable Rate Indicator
• IP65
• Gas Groups I, IIA and IIB

Differential Temperature Controller

X96 Delta

• Differential Temperature Controller

Pipe Line RTD Sensor - Threaded Connection

RPL201

• For Pharmaceutical / Biopharmaceutical industries
• -50 to 250 °C
• Reduced sheath assembly for fast response

Industrial Use Bourdon Pressure Gauge

Series 100.000

• Non-corrosive Media
• Liquid filled to dampen vibration(Series 100.000)
• Weatherproof with IP68 rating
• 0-1000 kg/cm²

Acid and Alkali RTD - With Teflon Coating

RAA310 / RAA312 / RAA320

• Titanium sheath with Teflon coating
• 3-wire Pt100 element in simplex or duplex assembly
• 0 to 200°C range

General Purpose Bourdon Pressure Gauge (Liquid filled)

Series 110.000

• 0 to 1000 Kg/cm²
• Non-corrosive Gases and Liquid Media
• Copper alloy wetted parts
• 50,63 100 and 150mm dial size

Low Pressure Diaphragm Gauge

PGD500 / PGD506

• Low pressure upto 1000mbar
• SS 316L diaphragm
• Economy version

Economy Sealed Gauge - With Cup Type Tension flange

400.000 (Old model no - PGS200 / PGS201 / PGS210 / PGS211)

• 0 to 16 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For non corrosive gases and liquids
• Diaphragm: SS316L with Teflon protection

Autoclave RTD

RAC244 / RT044

• For Continuous Sterilization Processes

PVC Sealed unit Gauge

PGS700

• 0 to 10 bar
• PVC body parts & viton diaphragm
• Phenol casing optional

Flanged Sealed Gauge with I-Section Sealed Unit

PGS600 / PGS601 / PGS610 / PGS611

• 0-210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316L Teflon protected
• I section type bolted construction

Flanged Sealed Gauge with Bolted Sealed Unit

PGS500 / PGS501 / PGS510 / PGS511

• 0-70 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• Diaphragm material, SS316L Teflon protected
• Flush type bolted construction
• For corrosive gases, liquid, viscous media

Economy Pressure Gauge with Welded Sealed Unit

PGS400 / PGS401 / PGS410 / PGS411

• 0-400 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316 Diaphragm
• For non corrosive gases and Liquids
• Economic model

High Pressure Sealed gauge

PGS300 / PGS301 / PGS310 / PGS311

• 0…210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For corrosive gases, liquids and viscous media

Flameproof Scanner

ISOSCAN (Flameproof)

• Multi-channel Scanner
• IP55
• Gas Groups I, IIA and IIB

Flameproof Differential Temperature Controller

X96 Delta (Flameproof)

• Differential Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Programmable Indicator

TEC301 (Flameproof)

• Programmable Temperature Indicator
• IP65
• Gas Groups I, IIA and IIB

Loop Powered Indicator

PLD40A

• Panel mount
• Programmable

Loop Powered Indicator

SD201

• Field / wall mount
• <1V loop drop

Signal Isolator

MSI7PC

• Oxygen lambda sensor

Signal Isolator

MSI7PB

• Carbon potential transmitter

Signal Isolator

MSI7P

• Universal input
• 5 outputs
• Integral LCD

Signal Isolator

MSI4P

• AC current/voltage input
• Dual output

Signal Isolator

SCC311

• Universal input
• Dual ouput
• LED display

Cost Effective Calibrator

MICROCAL

• Multiple Operational Modes
• Many Inputs Accepted
• High Accuracy

Flameproof Pipe Mount Temperature Transmitter

TX3DRB

• 14~32 V DC loop supply
• Isolation : 1000 V AC RMS, 50 hz/1 minute
• 4~20 mA or 20~4 mA selection for output
• Linear mode & Square root mode option for linear input

DIN Rail Temperature Transmitter

TX2DR (TC/mV)

• Isolated
• TC/mV

Loop Powered Indicator

PLD40B

• Field mount
• Programmable

Analog Input Module

SCM201

• 8 channels, each with universal input
• Isolated RS485/MODBUS RTU, up to 19200 Baud rate
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

Rate Indicator

RCT206

• RPM/RATE Indicator with Alarms
• 48x96

Flameproof ON-OFF Controller

TC96 (Flameproof)

• Programmable ONOFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof ON-OFF Controller

X96A (Flameproof)

• Programmable ONOFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof PID Controller

X48V1 (Flameproof)

• Autotune PID Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof PID Controller

X96P (Flameproof)

• Autotune PID Controller
• IP65
• Gas Groups I, IIA and IIB

Timers

RCT606

• Memory Timer
• 72x72
• 1 setpoints

Timers

RCT605

• Memory Timer
• 72x72
• 2 setpoints, 3 modes

Counter

RCT404

• Preset Counter
• 72x72
• 4-digit pushwheel switch

Rate Indicator

RCT203

• RPM/RATE Indicator with Totaliser
• 48x96

Rate Indicator

RCT202

• Programmable RPM/RATE Indicators
• 48x96

DIN Rail Temperature Transmitter

TX2DR (Pt100)

• Isolated
• Pt100