Greystone Humidity / Dew point

Greystone Humidity / Dew point

.

DUCT HUMIDITY TRANSMITTER

DUCT HUMIDITY TRANSMITTER

RH200 Series

  • Sensor Type - Thermoset Polymer based Capactive
  • Range - 0 to 100% RH
  • Accuracy - ±2, 3, or 5% RH (5 to 95% RH)
  • Response - 15 Seconds typical
  • Temp Dependence - ±0.05% RH/ °C
Add to inquiry cart Add to compare
DUCT HUMIDITY /TEMPERATURE TRANSMITTER

DUCT HUMIDITY /TEMPERATURE TRANSMITTER

RH210 Series

  • Humidity Sensor Type - Thermoset polymer based capacitive Accuracy - ±2, 3, or 5% RH, (5% to 95% RH) Measurement Range - 0 to 100% RH Temperature Dependence - ±0.05% RH/ °C Hysteresis - ±1.5% RH maximum
Add to inquiry cart Add to compare
ROOM HUMIDITY TRANSMITTER

ROOM HUMIDITY TRANSMITTER

HRC Series

  • Sensor - Thermoset polymer based capactive
  • Accuracy - ±2, 3 or 5% RH from 5 to 95% RH
  • Range - 0 to 100% RH non-condensing
  • Hysteresis - ± 3% RH
  • Response Time - 15 seconds typical
  • Stability - ±1.2% RH typical @ 50% RH in 5 years
Add to inquiry cart Add to compare
ROOM HUMIDITY/ TEMPERATURE TRANSMITTER

ROOM HUMIDITY/ TEMPERATURE TRANSMITTER

HTRC Series

  • RH Sensor - Thermoset polymer based capactive
  • Accuracy - ±2, 3 or 5% RH from 5 to 95% RH
  • Range - 0 to 100% RH non-condensing
  • Temperature Compensation - 0° to 50°C (32°-122°F)
  • Hysteresis - ± 3% RH
  • Response Time - 15 seconds typical
Add to inquiry cart Add to compare
HUMIDITY/TEMPERATURE TRANSMITTER c/w SETPOINT ADJUSTMENTS

HUMIDITY/TEMPERATURE TRANSMITTER c/w SETPOINT ADJUSTMENTS

SPC Series

  • Power Supply - 24Vac/dc ±10% (nonisolated half-wave rectified)
  • Consumption - 20 mA + (20ma x number of outputs) max @ 24 Vdc
  • Input Voltage Effect - Negligible over specified operating range
  • Protection Circuitry - Reverse voltage and MOV protected and output limited
  • Output Signals - 4-20 mA active (sourcing) or 0-5 Vdc or 0-10 Vdc (specify when ordering)
  • Output Resolution - 10 bit for all signals
Add to inquiry cart Add to compare
DEWPOINT TRANSMITTER

DEWPOINT TRANSMITTER

DP Series

  • Sensor Type - Thermoset polymer based capacitive
  • Temperature Sensor - Curve-matched NTC Thermistor
  • Power Supply - 20 – 27 Vdc, 16 – 27 Vac (non-isolated half-wave rectified)
  • Consumption - 50 mA max @ 24 Vdc, 1.5 VA max @ 24 Vac (current model), 30 mA max @ 24 Vdc, 1 VA max @ 24 Vac (voltage model)
Add to inquiry cart Add to compare
OUTSIDE HUMIDITY TRANSMITTER

OUTSIDE HUMIDITY TRANSMITTER

RH300 Series

  • Sensor Type - Thermoset Polymer based Capactive
  • Range - 0 to 100% RH
  • Accuracy - ±2, 3, or 5% RH (5 to 95% RH)
  • Response - 15 Seconds typical
  • Temp Dependence - ±0.05% RH/ °C
  • Hysteresis - ±1.5% RH maximum
  • Repeatability - ±0.5% RH typical
Add to inquiry cart Add to compare

Inquiry for

required after months
×