Download detailed specifications for this product

Download PDF

Magnehelic Differential Pressure Gages

Series 2000-SP

Bright red LED on right of scale shows when setpoint is reached. Field adjustable from gage face, unit operates on 12-24 VDC. Requires MP or HP style cover and bezel.

  • Service: Air and non-combustible, compatible gases. (Natural gas option available.)
  • Wetted Materials: Consult factory
  • Housing: Die cast aluminum case and bezel, with acrylic cover. Exterior finish is coated gray to withstand 168 hour salt spray corrosion test
  • Accuracy: ±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00,-60 Pa, -6MM ranges), throughout range at 70°F (21.1°C)
  • Pressure Limits: 35 psig (2.41 bar), HP option: 80 psig (5.52 bar)
  • Overpressure: Relief plug opens at approximately 25 psig (1.72 bar), standard gages only
  • Temperature Limits: 20 to 140°F. (-6.67 to 60°C)
  • Size: 4" (101.6 mm) diameter dial face
  • Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations
  • Process Connections: 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
  • Weight: 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
  • Standard Accessories: Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.)

Applications

Industries

Customization

    Not Available

    Please choose from our customization options and enter under comments while inquiring about this product`

Inquiry for

required after months
×

Email Details Of Magnehelic Differential Pressure Gages - Series 2000-SP



×