Magnetic Level Gauge

MLG201

• Rugged construction
• Easy mounting with flanged connection
• Low maintenance
• Continuous level monitoring (with use of transmitter 4-20mA output)

SS304 Tension Flange Chemical Seal Units

CSU300

• For High Pressure Applications
• Bolted Construction
• Up to 3000 psi / 210 kg/cm²

Cup Tension Flange Chemical Seal Unit

CSU200

• For low pressure applications
• Bolted construction
• Up to 150 psi / 10 kg/cm²

GPS Slave Clock

GSC401 - FLP Slave

• Time format : 4 digit (HH:MM)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC401 - Ethernet Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - Ethernet (10/100 Base-TX, 8-pin RJ-45X1)
• Power supply : 85-265 VAC

GPS Slave Clock

GSC301 - FLP Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - Ethernet Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - Ethernet _10/100 Base-TX, 8-pin RJ-45X1)
• Power supply : 85-265 VAC

GPS Slave Clock

GSC401 - RS485 Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RS485
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RS485 Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RS485
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RF Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

Dial Thermometer - Gas Filled (Temperature Gauge)

TGN200

SIDE MOUNTING LEVEL SWITCH PIVOTED TYPE

SPS201

• Process Connection: threaded BSP, NPT / flanged / triclover
• Switch rating :0.1 - 5 amps@250V AC

Welded Chemical Seal Unit

CSU400

• For High Pressure Applications
• All-SS Welded Construction
• Up to 6000 psi / 420 kg/cm²

Flushed Flange Chemical Seal Unit

CSU500

• High Pressure Applications
• All stainless steel design
• Up to 1000 psi / 70 kg/cm²

Reflex Level Gauge

RLG201

• For Visual Indication
• Flanged, Threaded Unions, Butt Weld Ends Connection
• Process connection orientation : Side/side, top/bottom with back/back

Cable Float Switches (Tilt Level Switches)

CFS201

• Low cost polypropylene level switch
• Hermetically sealed/moulded
• Microswitch operated

Float Guided Level Switches

FGS201 / FGS202 / FGS203 / FGS204 / FGS205 / FGS206 / FGS207

• Rugged construction
• Easy mounting with flanged or threaded connection
• Multilevel monitoring upto 4 levels

Submersible Level Transmitters

SLT201

• 2 wire, 4 to 20 mA output
• Fully sealed IP68 sensor for permanent submersion
• Special polyurethane cable ensures more flexibility and durability.
• SS316 Construction

Radar Level Transmitters - Contact Type

RLT201

• Contact type measurement
• Measuring range up to 30 meter
• Exproof

Ultrasonic Level Transmitters

ULT202 / ULT211 / ULT212

• ULT202, ULT212 : 0.4m ~ 10m for liquids
• ULT212 : 4~20mA or 4~20mA/HART
• Process connection : M66×2 or flange

Hawkeye - RH+T+DP Indicator

HAWKEYE

• Micro-controller based
• RH+T+DP Indicator
• 3 User programmable channels measurement
• Slave display unit - RH+T+DP remote

BATTERY OPERATED HUMIDITY INDICATOR

RHT803

• Battery operated
• Accuracy : ± 2% RH, ± 0.5 °C
• IP65, rugged construction

BATTERY OPERATED HUMIDITY INDICATOR

RHT802

• FLP
• IP65

PROGRAMMABLE SIGNAL ISOLATOR

SCC313

• Universal Input
• Dual Output
• Fast Response

Stick On Surface Temperature Thermocouple

TST500 & RST500

• Self Adhesive Tape
• Quick Response
• (-50) °C to +180 °C

Surface Temperature Thermocouple - Washer

TST300

• J/K/T
• Up to 300 °C

Analog Input Modules with Channel-to-channel Isolation

SCM211

• 4 channels, each with isolated universal input
• Isolated RS485/ MODBUS RTU, upto 57600 BAUD RATE
• Channel-to-channel isolation of 300 V AC
• Cost-effective Remote I/O For PLCs
• Powerful, flexible SCADA software
• Tmax version with 4~20 mA

3-Port Signal Isolator

SI3P

• Input: Voltage, Current, TC/RTD

Flow Rate Indicator-Totalizers

FLT401

• Inputs : 0 / 4~20 mA, 0~5, 1~5, 0~10 volts
• Square-root option
• 4-digit Rate Indicator, 6-digit Totalizer(Totaliser)
• Four setpoints each assignable to either flow rate or totalizer(Totaliser)
• Programmable flow rate, setpoints and relay modes, etc.

Flow Rate Indicator-Totalizers

FLT601

• Inputs : 0/4~20 mA, 0~5, 1~5, 0~10 volts
• Square-root option
• 6-digit Rate Indicator, 8-digit Totalizer(Totaliser)
• Four setpoints each assignable to either flow rate or totalizer(Totaliser)
• Programmable flow rate, setpoints and relay modes, etc.

Laser Welded Flush Flanged Chemical Seal Unit

CSU900

• For High Pressure Applications
• SS316L / Hastalloy / Tantallum Diaphragm
• Up to 6000 psi / 420 kg/cm²

DIN Rail Temperature Transmitter

SCC622

• RTD Input

DIN Rail Differential Pressure Transmitter

Series 616D

Precision Low Differential Pressure Transmitter

Series 610

Intrinsically Safe Differential Pressure Transmitter

Series 608

Explosion-proof Differential Pressure Transmitter

Series 3100D

Explosion-Proof Multiplanar Differential Pressure Transmitter

Series 3100MP

HART® Communication Protocol Software

Model DevCom2000

Differential Pressure Transmitter

Series 648B & 648C

Magnehelic® Differential Pressure Indicating Transmitter

Series 605

Low Range Differential Pressure Transmitter

Series 607

Magnesense® Differential Pressure Transmitter

Series AT2MS

Adjustable Differential Pressure Alarm

Series BDPA

Electrical contact Temperature Gauge

G Series

• Max. 250 V, 1 Amp rated power
• Magnetic snap action contact
• 100 and 150 mm dial sizes

DPDT Low Differential Pressure Switches

Series 1831

Acid and Alkali Thermocouple - Teflon Protective Sleeve

TAA530

• For Corrosive Environments
• Up to 200°C

Bypass Damper Switch

Series BYDS

Differential Pressure Transmitter

Series 616W

Differential Pressure Transmitter

Series 616WL

General Inquiry

Thermocouple

• Inquiry for any type of Thermocouple!

DIN Rail Mount Differential Pressure Transmitter

Series 607D

Differential Pressure Transmitter

Series 677B

Differential Pressure Transmitter

Series 616KD

316 Wet/Wet Differential Pressure Transmitter

Series 655A

Intrinsically Safe Differential Pressure Transmitter

Series ISDP

Differential Pressure Transmitter

Series DM-2000

Wet/Wet Differential Pressure Transmitter

Series 647

Capsuhelic® Wet/Wet Differential Pressure Transmitter

Series 631B

Fixed Range Differential Pressure Transmitter

Series 636D

Compact Differential Pressure Transmitter

Series 668

Wet/Wet Differential Pressure Transmitter

Series 629

Differential Pressure Transmitter

Series WWDP

Autoclave Validation Thermocouples

TAC243

• For Autoclave Validation, not continuous use
• 0 to 150°C range

SANITARY GAUGE - INDUSTRIAL AND PROCESS APPLICATIONS

SDT01

• All Stainless steel construction
• 1.5” or 2” Tri-clover connection
• Whether proof to IP68 per IS/IEC 60529:2001
• Diaphragm material, SS316L
• Scale ranges upto 0...42 2 kg/cm
• Available with liquid filled case for application with high dynamics pressure pulsations or vibrations

Diaphragm Seal, Flange Mounted Pressure Gauge

CSF06

• Flush type bolted construction, standard model
• Flanged process connection for direct mounting
• Weatherproof to IP68 per IS/IEC 60529:2001

Diaphragm Seal with I Section

CSE08

• I-section type bolted construction
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Liquid Filled Dial Thermometer

Liquid Filled

• Fast Response
• Suitable for sanitary application
• All SS construction
• Rigid stem or Capillary type

Bimetal Dial Thermometers

BEA Bimetal

• Coiled bi-metal sensing element
• All stainless steel construction
• -40 to 400 °C

Welded Low Pressure Diaphragm Gauge

LPA12 Series

• Low pressure economy version
• Element made of SS316 diaphragm

Multi-Channel Scanner

ISOSCAN-V

• 16 Channel Temperature Scanner
• Non-volatile memory for parameters - no batteries
• 3 key, 5 level programming
• Setpoint and level locks

Multi-Channel Scanner

ISOSCAN-H

• 16 Channel Temperature Scanner
• RS485 with MODBUS RTU
• Powerful, flexible SCADA software available

GPS Master-Slave Clock

GMC203 (Master)

• Time format : 6 digit (HH:MM:SS)
• Time source : GPS, NTP
• Isolation power supply and RS485 : 2000VAC, RMS, 1 minute

HYPODERMIC RTD For Autoclave

RAC900/901

• Chizle shaped tip for easy penetration Designed for Laboratory, Food processing use and similar fields Small size provides fast response time

8 Channel Scanner

UMX201

• 8 universal analog inputs
• Maximum 4 or 8 relay outputs
• 85~265 VAC or 18~35 V DC supply

GPS Slave Clock

GSC401 - RF Flush Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC301 - RF Flush Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

GPS Slave Clock

GSC401 - RF Slave

• Time format : 4 digit / 6 digit (HH:MM / HH:MM:SS)
• Master to slave link - RF wireless (867MHz)
• Power supply : 85~265 VAC / 50Hz

GPS Master Clocks

GMC201 (Master)

• Power supply : 85~265 VAC / 50Hz
• Communication interface : RF wireless, RS485 (MODBUS RTU)
• Protocol : Proprietary
• Parameter configuration : PC based utility

RTD SENSORS FOR FERMENTERS

RHF410

• Pt100 3 wire Single / Dual Circuit, Class A accuracy
• Wetted parts made of SS316L
• Surface finish Ra <=0.8 micro m (Standard)
• SS304 terminal head and Coupling nut

SANITARY RTD WITH TRI CLOVER CONNECTION - HEAD TYPE

RHS602

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Wetted parts made of SS316L (1.4404)
• Die cast aluminum terminal head (IP68)

HYGIENIC SENSOR FOR PIPE LINE

RTP502

• Maximum temperature : Probe : 200°C, Cable : 200°C
• Accuracy : Pt-100 element, IEC 60751 Class A
• Process connection : G 1/8” for mounting to weld-in boss or thermowell

Electrical Contact Gauge

EOC500

• Adjustable, snap action contact
• Standard 1NC+1NO switching function

Electrical Contact Gauge

EOC200

• Adjustable, snap action contact
• Standard 1NC+1NO switching function

Glycerine Filled Pressure Gauge

PBE201

• Glycerine filled bourdon type
• Excellent load cycle stability and shock resistance
• Compressor, utility, pipe line, air & water application

Pressure Transmitter

PTX201

• All stainless steel construction
• Excellent load cycle stability and shock resistance
• 4~20 mA, 2-wire output
• Ranges upto 400 barg

SANITARY RTDS

RHS802

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• 6mm sheath dia (straight)
• Sheath length : 25mm & above. 6mm / 6R above 25mm and upto 200mm. 8mm / 8R for longer sheaths.
• Wetted parts made of SS316L (1.4404)
• SS304 terminal head with IP68

RTD SENSORS FOR FERMENTERS

RCF202

• Pt100 3-wire single / dual circuit
• Class A or higher accuracy
• Wetted parts made of SS316L

RTD SENSORS FOR FERMENTERS

RHF300

• Pt100 3 wire Single / Dual circuit
• Temperature range - ambient -50... +85°C
• Temperature range - sensors tip -50...+150°C

Differential Pressure Gauge

DPG

• Monitoring of filter contamination
• Level measurement in closed vessels

Gas Filled Dial Thermometer

G (Rigid Stem) G-AC(Extension Capillary)

• Fast response
• Suitable for sanitary application
• All SS construction
• Rigid stem or Capillary type

DIAPHRAGM SEAL, CAPSULE TYPE WITH THREADED CONNECTION

CSA05

• High pressure welded construction, economic model
• Threaded process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Diaphragm Seal With Flush Flange

CSF10 Series

• Flush type welded construction, standard model
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Pressure Transmitter

PTD251

• Termination : Aluminum head with threaded cap and chain with single compression cable gland
• Excellent load cycle stability and shock resistance
• 4-20mA, 2-wire output signal

Diaphragm Seal With Thread Connection

CSA03 Series

• High pressure bolted construction, standard model
• Threaded process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Diaphragm Seal With Threaded Connection

CSA02

• Low pressure bolted construction, economy model
• Threaded process connection for direct mounting

Low Pressure Diaphragm

LPA01

• Low pressure economy version
• Element made of SS316 diaphragm

Diaphragm Seal With Welded Flange

CSF16

• Flush type welded construction, standard model
• Flanged process connection for direct mounting
• Whether proof to IP68 per IS/IEC 60529:2001

Vaccum Type Pressure Gauge

VBE200

• Bourdon tube type vacuum gauge
• All internal and external SS construction
• Excellent load cycle stability and shock resistance

RTD FOR CONTINUES USE IN AUTOCLAVE

RAC232 / RAC242

• 4-wire Pt100 element in simplex or duplex assembly
• 0 to 150°C range
• Teflon insulated cable in 5 / 10 meters

RTDS FOR AUTOCLAVE

RAC241

• 4-wire Pt100 element in simplex or duplex assembly
• 0 to 150°C range
• Teflon insulated Cable in 5 meters and 10 meters

RS485 ISOLATED REPEATER

DCC302

• 1800V optically isolated data lines
• -40 to 80°C operating temperature
• Modbus ASCII/RTU

USB TO HART CONVERTER - ISOLATED

DCC503

• Complete HART device interface
• Complies with HART physical layer
• Provide 2 KV isolation between PC and HART instrument that eliminate grounding effect

RS232 TO RS485/RS422 CONVERTER

DCC301

• Transmission rate : 300 - 115200bps
• Transmission distance : RS485 1200m, RS232 5m
• Working mode : asynchronous, half duplex, differential transmission
• Supports 32 nodes on RS485 bus
• 3-port isolation between Power Supply, RS232, RS485 & RS422

SERIAL TO ETHERNET CONVERTER WITH DUAL MASTERS

DCC211

AC/DC CURRENT/VOLTAGE TRANSDUCER

SCC314

• AC/DC Input
• Dual Output
• RS485

USB TO SERIAL CONVERTER - ISOLATED

DCC501

• Compatible with USB 2.0
• 12Mbps USB data rate
• 921.6 kbps maximum baudrate for super fast data transmission
• LEDs for indicating USB and TxD/RxD activity
• 2 kV isolation between PC and the instrument being programmed
• Din rail and surface mount

SERIAL TO ETHERNET CONVERTER WITH PoE

DCC202

• 10/100 Mbps Ethernet port
• Browser based configuration utility
• Telnet, TCP Modbus protocols
• Serial interface : RS232, RS485, RS422

ANALOG INPUT MODULE WITH ETHERNET PORT

SCM203

• 8 universal analog inputs
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

4 ½ DIGIT PROCESS INDICATOR WITH ALARMS

TEC401

Displacer level switch

DLS201

• Suitable for narrow and wide level ranges
• Range : Upto 15 mtrs
• Adjustable setpoints
• Suitable for viscous and slurry type liquids

FLOAT & BOARD LEVEL GAUGE

FBG201

• Simple
• Easy mounting
• Low maintenance
• Economical measurement solution

Tubular level gauge

TBG201

• Rugged construction
• Easy mounting
• Low maintenance
• Direct visible level indication
• Economical measurement solution

Surface Temperature RTD Sensors- Washer Type

RST202 / RST203

• Easy to install & replace
• Pt-100, 3-wire configuration with single element in Class B as per IEC 751
• -50 to 250°C range
• SS304 washer

Transition Joint RTD Sensors - Reduced Tip

RTJ220

• Platinum RTD in 2/3/4-wire configuration with single/dual elements in Class B/Class A
• -50 to 250°C range
• Integral cable makes the assembly lighter and easy to install
• Reduced tip design for faster response

SIGNAL ISOLATOR, DUAL OUTPUT

SI4P

• 0/4~20 mA input
• Line fault detection

Float Guided Level Switches

FG202

RTD for Continuous use in Autoclave

RAC240

RTD Sensors for Fermenters

RXF300

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient -50... +85°C
• Temperature range - sensors tip -50...+150°C

SANITARY RTD

RHS610

• Pt-100, 3-wire Single / Dual circuit, Class A accuracy
• Head mounted transmitter with 4-20mA output
• Temperature range - ambient, -50... +85°C
• Temperature range - sensors tip, -50...+250°C
• Ra value <=0.51 micro m for wetted parts and <= 0.8 micro m for non wetted parts

RTD for Lyophilizer and Deep Freezer

RFL258

• Teflon coating
• -100 to 200°C
• SS316L sheath

SANITARY RTD

RHS600

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient, -50... +85°C
• Temperature range - sensors tip, -50...+250°C
• Roughness value (Ra) <= 0.8 micro m and <= 0.51 micro m for non wetted and wetted parts respectively

RTD SENSORS FOR FERMENTERS

RHF400

• Pt100 3 wire Single / Dual circuit, Class A accuracy
• Temperature range - ambient -50... +85°C
• Temperature range - sensors tip -50...+150°C

RTD for Continues use in Autoclave

RAC251

• Pt-100, 4-wire
• Simplex (One) / Duplex (Two) circuits
• Range 0 to 150°C
• Sheath material - SS316L (1.4404)

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP812

• Integrated 4-20 mA transmitter
• Ranges from 0...200°C with cooling neck
• Extremely Short response times

COMPACT RTD SENSORS With M12 Connector

RCP802

• Pt100, 4 wire
• -50...+200°C measuring range with cooling neck
• Extremely short response times

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP712

• Integrated 4-20 mA transmitter
• Ranges from -50...200°C with cooling fins
• For pipe lines from 15NB onwards
• Extremely Short response times

RTD with M12 Connector - COMPACT RTD SENSORS

RCP702

• Pt100, 4 wire
• Class A accuracy as standard, Class AA optional
• -50...+200°C measuring range with cooling fins
• Extremely short response times

COMPACT RTD SENSORS WITH TRANSMITTER With M12 Connector

RCP612

• Integrated 4-20 mA transmitter
• Ranges from -50...+150°C
• For pipe lines from 15NB onwards
• Extremely Short response times

Compact Sensors For Pipeline - COMPACT RTD SENSORS WITH TRANSMITTER

RCP312

• Integrated 4-20mA transmitter
• Ranges from -50...200°C with cooling fins
• For pipe lines from 15NB onwards
• Extremely Short response times

Acid and Alkali Thermocouple - WITH TEFLON INSULATED OUTER SLEEVE

TAA Series

• SS316 sheath with TEFLON protective sleeve
• Polypropylene head
• Bendable sheath

SANITARY RTD WITHOUT PROTECTION SHEATH

RHS70 Series

• Offered with Sanitary SMS Connection with / without male part and gasket
• -50 to 250°C & -50 to 400°C
• Customized sheath lengths

RH+TEMPERATURE TRANSDUCER

RHT811 - With Display

• 2x Analog outputs or 1xAnalog+Pt100/Pt1000 RTD output
• 18~30 V AC/DC supply
• Dual 7-segment LCD display to show RH & T

Float Guided Level Transmitters

FGT201

Flameproof RTD - with Sanitary fittings

RHF607

• Flameproof die cast aluminum head (SS304, SS316 and cast iron heads optional)
• -50 to 250 °C range
• SS316L Sheath

Bimetallic Dial Thermometer (Temperature Gauge)

TGB200

• Bimetallic sensing element
• 2.5” / 4” / 6” dial sizes
• -50 °C to 400 °C

Miniature Chemical Seal Unit

CSU800

• Miniature seal units for pressure transmitters
• Up to 200 psi / 14 kg/cm²

DIN Rail Temperature Transmitter

TX1DR

• Pt100 or TC/mV

Head Mount Temperature Transmitter with HART Communication

SCC631

• Universal settings with HART protocol for various input signals
• 2-wire technology, 4~20 mA analog output
• High accuracy over total ambient temperature range
• Optical isolation

Head Mount Temperature Transmitter-

SCC642

• RTD Input
• Non-Isolated
• Programmable

Head Mount Temperature Transmitter

TX1HM

• Pt100

Loop Powered Isolator

LPI51

• Loop Drop 3.7V
• Load 25 - 375 Ohms

Multi-Channel Scanner

ISOSCAN

• 16 Channel Temperature Scanner
• Front panel user calibration
• Input burn protection

Differential Pressure Transmitter

SCC503

• 2-wire

Differential Pressure Transmitter

SC502

• 2-wire

Differential Pressure Transmitter

SC504

• 2-wire
• Dual Display

Signal Isolator

SCC401

• Voltage, Current, TC/RTD, Ohms, etc

Timers

RCT601

• Memory Timer
• 48x48
• 2 setpoints

Timers

RCT604

• Memory Timer
• 72x72
• 2 setpoints

Counter

RCT404

• Preset Counter
• 72x72
• 4-digit pushwheel switch

Counter

RCT403

• Preset Counter
• 72x72
• 6-digit pushwheel switch

Rate Indicator

RCT203

• RPM/RATE Indicator with Totaliser
• 48x96

Rate Indicator

RCT202

• Programmable RPM/RATE Indicators
• 48x96

Rate Indicator

RCT206

• RPM/RATE Indicator with Alarms
• 48x96

Analog Input Module

SCM201

• 8 channels, each with universal input
• Isolated RS485/MODBUS RTU, up to 19200 Baud rate
• MODBUS / TCP & Telnet multidrop communication for PLC, SCADA, etc.

Loop Powered Indicator

PLD40B

• Field mount
• Programmable

Loop Powered Indicator

PLD40A

• Panel mount
• Programmable

Signal Isolator

MSI7PC

• Oxygen lambda sensor

Signal Isolator

MSI7PB

• Carbon potential transmitter

Signal Isolator

MSI7P

• Universal input
• 5 outputs
• Integral LCD

Signal Isolator

MSI4P

• AC current/voltage input
• Dual output

Signal Isolator

SCC402

• AC/DC Voltage
• AC/DC Current

RH+T Transmitter

SC806 (Flameproof - Wall Mount)

• Wall Mount
• FLP

RH+T Transmitter

SC804

• Surface Mount
• FLP
• Dual Display

RH+T Transmitter

SC807

• Surface / Wall / Duct Mount

RH+T Transmitter

SC805

• Surface / Wall / Duct Mount
• LCD Display

Blind Temperature Controller

ELEKTRA II

• J, K, Pt100
• 1 Setpoint
• 72x72

Digital Temperature Indicator

PRIMA 0SP

• J, K Pt100
• 96x96

Digital Temperature Controller

PRIMA 720

• J, K Pt100
• 72x72

Digital Temperature Controller

PRIMA 480

• J, K, Pt100
• 48x48

Digital Temperature Controller

EK1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 481

• J, K, Pt100, mA, mV
• 1 Setpoint
• 48x48

Digital Temperature Controller

PRIMA 1SP

• J, K, Pt100, mA, mV
• 1 Setpoint
• 96x96

Digital Temperature Controller

PRIMA 2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK4SP

• J, K, Pt100, mA, mV
• 4 Setpoints
• 96x96

Digital Temperature Controller

EK2SP

• J, K, Pt100, mA, mV
• 2 Setpoints
• 96x96

Digital Temperature Controller

EK491

• J, K, Pt100 mA, mV
• 1 Setpoint
• 48x96

Low Differential Pressure Switch Designed for OEM Products

Series 1700

Magnehelic Differential Pressure Gage

Series AT22000

Thermocouple for Deep freezer and Lyophilzation

TFL248 now as RFL258

• Teflon coating
• -100 to 200°C
• SS316L sheath

Stick On Thermocouple

TS

• Self Adhesive Tape
• Less than 0.2 sec response
• -30 °C to +180 °C

Quick Disconnect Thermocouples

TQ

• Mineral Insulated
• Lightweight
• Quick response time

Low Cost Thermocouple

TL200

• Low cost varieties
• Class 2 (IEC) grade thermocouple wires
• Up to 300°C

Thermocouple for Air and Gas

TG000

• Flowing non-corrosive air
• Up to 400°C
• Perforated tip for fast response

Slot RTD Sensors

RNS202

• Inserted between winding
• Upto 180°C
• Fiber body

RTD for Lyophilizer and Deep Freezer

RFL248

• Teflon coating
• -100 to 200°C
• SS316L sheath

Pipe Line RTD-Tri Clover Connection with Weld-In TEE

RPL602

• SS316L Weld-in TEE joint
• -50 to 250°C
• For pharmaceutical industries

Pipe Line RTD - Tri Clover Connection With Clamp-In TEE

RPL601

• 0.5”/1”/1.5 /2” Tri clover connections
• -50 to 250°C
• For pharmaceutical industries

RTD sensor For Dry Heat Sterilizer (DHS)

RDH245

• For high pressures and temperatures
• -50 to 250°C
• 3-wire Pt100 element in simplex or duplex assembly

Indoor Air Temperature RTD

RHV201 / RHV202

• ABS thermoplastic housing
• -20 to 65 °C
• 3-wire Pt100 element in simplex assembly

Quick Disconnect RTD - Tri-Clamp M12 Connector

RCM607 / RCM617

• 1” / 1.5”/ 2” Triclover connection
• -50 to 250°C range
• 3-wire Pt100 element in simplex or duplex assembly

DIN Rail Temperature Transmitter

SCC621

• RTD Input

Minihelic II Differential Pressure Gage

Series 2-5000

Capsuhelic Differential Pressure Gage

Series 4000

Compact Economic Differential Pressure Switch

Series PDPS

Miniature Adjustable Pressure Switch

Series MDA

Miniature Pressure Switch

Series MDS

Gas Pressure Switch

Series 1996

Gas Pressure/Differential Pressure Switch

Series PG

Double Bellows Differential Pressure Switch

Series DP

Floating Contact Null Switch for High and Low Actuation

Series 1640

Large Diaphragm Differential Pressure Switches

Series 1630

Single and Dual Pressure Switch

Series 1620

Explosion-proof Differential Pressure Switch

Series 1950G

Explosion-proof Differential Pressure Switch

Series 1950

Compact Low Differential Pressure Switch

Series 1900

Low Differential Pressure Switch for General Industrial Service

Series 1800

Differential Pressure Data Logger

Series DL7

Differential Pressure Piston-Type Gage

Series PTGD

Process Filter Gage

Series PFG2

DigiMag® Digital Differential Pressure and Flow Gages

Series DM-1000

Sanitary RTD with Tri Clover Connection - Head Type

RH6*7

• 0.5” / 1” / 1.5” / 2 “ Triclover connections
• 2, 3 or 4-wire platinum element in simplex or duplex assembly
• -50 to 250°C

Pt100 Handheld Thermometer

Accurad71

• Pt100 Input

Flameproof Loop-Powered Indicator

PLD40 (Flameproof)

• Loop Powered Indicator
• IP66
• Gas Groups I, IIA, IIB and IIC

Flameproof RH + T ON-OFF Controller

HX96A (Flameproof)

• RH+T ON-OFF Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof RH + T Transmitter

SC806 (Flameproof - Duct Mount)

• 2-wire RH+T Transmitter
• IP66
• Gas Groups I, IIA, IIB and IIC

Flameproof RH + T Transmitter

SC804 (Flameproof)

• Highly Accurate RH + T
• Dual Row Display Measurement
• User Programmable Range & Unit

Pipe mountTemperature Transmitter

SCC633 (Flameproof)

• 2-wire Temperature Transmitter
• IP65
• Gas Groups I, IIA and IIB

Flameproof Temperature Transmitter

TX1HM (Flameproof)

• 2-wire Temperature Transmitter
• IP65
• Gas Groups I, IIA and IIB

Flameproof Surface Mount Temperature Transmitter

TX3DR (Flameproof)

• 14~32 V DC loop supply
• Isolation : 1000 V AC RMS, 50 hz/1 minute
• 4~20 mA or 20~4 mA selection for output
• Linear mode & Square root mode option for linear input

Flameproof Memory Timer

RCT605 (Flameproof)

• Multifunction Memory Timer
• IP65
• Gas Groups I, IIA and IIB

Flameproof Rate Indicator

RCT206 (Flameproof)

• RPM/RATE Indicator with Alarms
• IP65
• Gas Groups I, IIA and IIB

Flameproof Rate Indicator

RCT202 (Flameproof)

• Programmable Rate Indicator
• IP65
• Gas Groups I, IIA and IIB

Flameproof Scanner

ISOSCAN (Flameproof)

• Multi-channel Scanner
• IP55
• Gas Groups I, IIA and IIB

Flameproof Controller

TC48V3 (Flameproof)

• Programmable Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Controller

TEC302 (Flameproof)

• Programmable Temperature Controller
• IP65
• Gas Groups I, IIA and IIB

Flameproof Programmable Indicator

TEC301 (Flameproof)

• Programmable Temperature Indicator
• IP65
• Gas Groups I, IIA and IIB

Timers

RCT703

• Non-memory Timer
• 72x72
• 1 setpoint

TC K Handheld Thermometer

Digirad71

• TC K Input

Universal Input Handheld Thermometer

Unirad

• Universal Input

Sanitary RTD with Female Nut

RHW601

• Female process connections
• -50 to 250°C
• 2, 3 or 4-wire platinum element in simplex or duplex assembly

Instrumentation Control Panels

CP-INS

General Purpose Bourdon Pressure Gauge (Liquid filled)

Series 110.000

• 0 to 1000 Kg/cm²
• Non-corrosive Gases and Liquid Media
• Copper alloy wetted parts
• 50,63 100 and 150mm dial size

Sanitary Gauges - Sterile Connection

PGF400 / PGF401

• All Stainless steel construction
• 0…42 Kg/cm²
• IP 68 per IS/IEC 60529:2001

Tri-Clover Mounted Sanitary Pressure Gauge

PGF300 / PGF301

• 0 to 42 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• Diaphragm material: SS316L

Autoclave Validation RTD

RAC243

• For Autoclave Validation
• 0 to 150°C
• 3-wire Pt100 element

Low Pressure Diaphragm Gauge

PGD500 / PGD506

• Low pressure upto 1000mbar
• SS 316L diaphragm
• Economy version

Compact Capsule Gauge

CCC200 Series

• Element made of Brass or SS304 capsule
• Whether proof to IP68 per IS/IEC 60529:2001
• Scale ranges upto 0...600mbar

Economy Sealed Gauge - With Cup Type Tension flange

400.000 (Old model no - PGS200 / PGS201 / PGS210 / PGS211)

• 0 to 16 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For non corrosive gases and liquids
• Diaphragm: SS316L with Teflon protection

Flanged Sealed Gauge with I-Section Sealed Unit

PGS600 / PGS601 / PGS610 / PGS611

• 0-210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316L Teflon protected
• I section type bolted construction

Flanged Sealed Gauge with Bolted Sealed Unit

PGS500 / PGS501 / PGS510 / PGS511

• 0-70 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• Diaphragm material, SS316L Teflon protected
• Flush type bolted construction
• For corrosive gases, liquid, viscous media

Economy Pressure Gauge with Welded Sealed Unit

PGS400 / PGS401 / PGS410 / PGS411

• 0-400 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• SS316 Diaphragm
• For non corrosive gases and Liquids
• Economic model

High Pressure Sealed gauge

PGS300 / PGS301 / PGS310 / PGS311

• 0…210 Kg/cm²
• IP 68 per IS/IEC 60529:2001
• For corrosive gases, liquids and viscous media

Industrial Bourdon Type Pressure Gauge

PBE200

• Suitable for corrosive environments and gaseous or liquid media
• Excellent load cycle stability and shock resistance
• Utility, pipe line, air & water application

Pipe Line RTD Sensor - Threaded Connection

RPL201

• For Pharmaceutical / Biopharmaceutical industries
• -50 to 250 °C
• Reduced sheath assembly for fast response

Timers

RCT606

• Memory Timer
• 72x72
• 1 setpoints