Timers

RCT703 is a multifunction programmable timer to automatically operate a time-based process, counting upwards or downwards. It has volatile memory and will not store information without a power supply. RCT703 features a pushwheel switch for frequent setpoint changes. The timer features a wide range of configurable control inputs. Start simply turns on the timer and there are 3 variations each for the Stop, Reset and Gate control input functions. The Stop function can stop the timer and maintain relay status, turn the relay on or turn it off. Similarly, Gate will freeze the timer in presence of an input and maintain relay status, turn the relay on or turn it off. Reset maintains the timer at its initial state as long as input is present, the timer will start counting up or down when the input is removed. In Pulse reset mode, it will reset and immediately restart the timer. In the third Reset variation, it will reset the timer and wait for a start pulse to begin counting again. A single LED displays the time counted up or down, 5 additional LEDs indicate hours, minutes, seconds, timer status and relay status. 1 setpoint can be programmed by the operator via a pushwheel on the front of the unit. It is accurate to 0.01% of a quartz crystal. RCT703 features one relay with 4 relay functions: ON-DELAY, OFF-DELAY, CYCLIC-1 and CYCLIC-2.